Tower of Pi attempt

Post your streaming time/info here, so people know when you're printing live
Post Reply
cweiss
Plasticator
Posts: 12
Joined: Thu May 22, 2014 10:36 pm

Tower of Pi attempt

Post by cweiss »

I'll be trying to print the Tower of Pi http://www.thingiverse.com/thing:271769 Today (6/8).


Live stream from Dropcam: http://dropc.am/p/rostock

It's a 13hr print, here's to hoping it doesn't screw up!
RAMTechRob
Printmaster!
Posts: 171
Joined: Tue Apr 22, 2014 10:00 pm

Re: Tower of Pi attempt

Post by RAMTechRob »

Excellent clarity on that video. Looks good so far.
cweiss
Plasticator
Posts: 12
Joined: Thu May 22, 2014 10:36 pm

Re: Tower of Pi attempt

Post by cweiss »

This is just cruel and unusual punishment on the Bowden extruder. It has to retract a bit between each move between character legs. Sounds like a pneumatic nail gun. There's definitely a bad corner to the print, I'm guessing one of the cassettes is sloppy.
User avatar
Tinyhead
Printmaster!
Posts: 441
Joined: Thu Jan 23, 2014 11:44 pm
Location: Ontario, Canada

Re: Tower of Pi attempt

Post by Tinyhead »

Nice job. Looks like minimal stringing too.
Post Reply

Return to “Live Stream Announcments”