(Group Buy) for 7"x7.5" Heated Bed
Re: (Group Buy) for 7"x7.5" Heated Bed
You think it would work to isolate the extruder too Lee?
Re: (Group Buy) for 7"x7.5" Heated Bed
Not sure how you mean to use it.
It can be used as a gasket. This stuff is basically like a sheet of cotton, but much denser. Feels pretty heavy for what it is.
It can be used as a gasket. This stuff is basically like a sheet of cotton, but much denser. Feels pretty heavy for what it is.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
I mean wrapping it around the extruder barrel to minimize the heat radiation and keep the temperature stabile.Leeway wrote:Not sure how you mean to use it.
It can be used as a gasket. This stuff is basically like a sheet of cotton, but much denser. Feels pretty heavy for what it is.
Re: (Group Buy) for 7"x7.5" Heated Bed
Oh it would definitely hold the heat in, but most guys need to actually cool that part to keep the heat from getting to the extruder mounting carriage.
If you are having trouble keeping it up to temp, then this might work.
If you are having trouble keeping it up to temp, then this might work.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Lee, I would be interested in a bit of that stuff, I haven't decided how I 'm going to mount my Phebe yet but some insulation seems like a good idea.
Let me know the particulars (price, shipping...) when you get a chance.
Thanks
Anthony
Let me know the particulars (price, shipping...) when you get a chance.
Thanks
Anthony
Anthony Leander
Running the Creeper Creator
Running the Creeper Creator
Re: (Group Buy) for 7"x7.5" Heated Bed
Shipping flat rate costs $5.15. Total cost with shipping is $8.00
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
I would like a piece of that sheet Lee. Enough for 3-4 beds depending what can be in a $10-11 envelope. How much and how can I pay? Are you on the chipin list?
Re: (Group Buy) for 7"x7.5" Heated Bed
Shipping to Denmark will cost more with Flat rate.
I will check into the shipping costs.
Off topic, BTW my first wife and I got married in Odensee. Beautiful place. Beautiful wife. Just trying to remember the good times.
You will wind up paying mostly for shipping. Not trying to profit, but make a little cash back.
A not to H1 guys, offer a piece of this material with your circuit board.
It will eleviate lots of future issues that are heat bed related.
I will check into the shipping costs.
Off topic, BTW my first wife and I got married in Odensee. Beautiful place. Beautiful wife. Just trying to remember the good times.
You will wind up paying mostly for shipping. Not trying to profit, but make a little cash back.
A not to H1 guys, offer a piece of this material with your circuit board.
It will eleviate lots of future issues that are heat bed related.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Lee, I'm in for one piece.
Let me know how to get the funds to you.
Anthony
Let me know how to get the funds to you.
Anthony
Anthony Leander
Running the Creeper Creator
Running the Creeper Creator
Re: (Group Buy) for 7"x7.5" Heated Bed
Just send as letter. That is much cheaper. Yeh Denmark is beautiful. On the downside we got cold and rainy weather and world record in tax
Re: (Group Buy) for 7"x7.5" Heated Bed
Just send me your email and I can invoice you through papal.
Guys, I feel as if I am wronging the forum by trying to sell something here.
My intent is not that way. I would like to be able to help by providing a needed material IMO.
Contact me at my email.
leesty at gultel.com
Guys, I feel as if I am wronging the forum by trying to sell something here.
My intent is not that way. I would like to be able to help by providing a needed material IMO.
Contact me at my email.
leesty at gultel.com
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Anything over 3/4" thick cannot be classified as a letter. It must be a package.TKL wrote:Just send as letter. That is much cheaper. Yeh Denmark is beautiful. On the downside we got cold and rainy weather and world record in tax
I can send cheaper, but will need to research that some.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Right, but several feet of this will not fit in a small flat rate box.
Medium would be the standard for more than a foot or two. I can also ship parcel post. It will take longer, but be cheaper.
Medium would be the standard for more than a foot or two. I can also ship parcel post. It will take longer, but be cheaper.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
You can have 6 layers of the sheet x 8-5/8" x 5-3/8" without compressing it and I guess you can compress it a bit? How wide is the role?
Re: (Group Buy) for 7"x7.5" Heated Bed
It's 2 foot wide.
It will compress some. I will check and see how much of it I can stuff in a small box.
It will compress some. I will check and see how much of it I can stuff in a small box.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Hey Lee, I scrutinized McMaster's website for insulation materials back in March and bought several to try but did not see that one in 1/4" thickness! I wonder if that is a new addition or if I just overlooked it. I am going to pick up a roll of the 8 lb/cu in material with a lower heat flow. I can use it in some other applications I have too.
I used a reflective insulation board on my original hot bed. Even with 1/8" standoffs above that my acrylic table warped. I ended up making a new aluminum sub table. That solved the warping problem but I still lose a lot of heat out the bottom. This insulation should fix that.
cheers,
Michael
I used a reflective insulation board on my original hot bed. Even with 1/8" standoffs above that my acrylic table warped. I ended up making a new aluminum sub table. That solved the warping problem but I still lose a lot of heat out the bottom. This insulation should fix that.
cheers,
Michael
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: (Group Buy) for 7"x7.5" Heated Bed
I had a lot of warping as well. Even with phenolic table until I installed this insulation. It may be new, but I bought this a couple months ago.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
You guys at H1 may want to get a roll of this and ship the correct size along with the circuit boards. You would get quite a few of these from one roll.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
Hey leeway, count me in, enough for one board. Let me know
Re: (Group Buy) for 7"x7.5" Heated Bed
I'll be able to pack some of these up this weekend and let you guys know.
Thanks.
Thanks.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
on a side note , the 7"x7" Borosilicate Glass that Mcmaster-Carr offers fits perfectly between the screw holes on the heat board front to back . The only problem is the glass was $17 and with shipping and everything came out to $24 .. But I love it and fits great !.
-
- Printmaster!
- Posts: 67
- Joined: Mon Apr 02, 2012 8:52 am
Re: (Group Buy) for 7"x7.5" Heated Bed
Hey leeway, count me in, enough for one board. Let me know
Tim
Tim
Re: (Group Buy) for 7"x7.5" Heated Bed
Okay, guys.
I have several of these packed up. 1 square foot per small flat rate box.
I can ship more than 1 foot if you need, but will need to figure out the cost according to where you live.
I am looking into the cheapest way to send this to Denmark as well.
I'll holler back when I know.
Just shoot me an email if interested.
leesty at gulftel.com
Thanks.
I have several of these packed up. 1 square foot per small flat rate box.
I can ship more than 1 foot if you need, but will need to figure out the cost according to where you live.
I am looking into the cheapest way to send this to Denmark as well.
I'll holler back when I know.
Just shoot me an email if interested.
leesty at gulftel.com
Thanks.
Lee
Re: (Group Buy) for 7"x7.5" Heated Bed
I can ship a one square foot in the US for $8.00. in a small flat rate box, or enough for 3 beds, which is a little over 7" by 24" long for $15.00. The later would ship Priority mail as well, but not a flat rate box.
Same price would apply to Denmark for 3 bed size, but would be shipped First Class Parcel Post.
Same price would apply to Denmark for 3 bed size, but would be shipped First Class Parcel Post.
Lee