I just finished the build on my Rostock max v3, and I ended up with parts left over. I understand that there may be parts that were for the v2, but I'd appreciate it if someone in the group could take a look at my pile of parts and reassure me that I didn't miss anything. The linked picture shows the pile. The stuff to the right are things I'm most sure are just leftovers. I'm most concerned about the three black brackets on the left and the bag of connectors.
https://drive.google.com/open?id=0B7aVe ... XUwdERxbVE
Thanks!
Extra Parts Check (Rostock max v3)
Extra Parts Check (Rostock max v3)
Rostock Max v3 (my first 3D printer)
-
- ULTIMATE 3D JEDI
- Posts: 1561
- Joined: Wed Sep 23, 2015 2:55 pm
Re: Extra Parts Check (Rostock max v3)
Yeah. That's all safe stuff to have left over. The black brackets are a hold over from the first introduction of injection molded carraiges to the V2, before the ball joint arms. The extra connectors are from the bag Ultimachine packs and provides to Seeme.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router
Sic Transit Gloria Mundi
01-10011-11111100001
Re: Extra Parts Check (Rostock max v3)
Thanks, Xenocrates! I'll sleep a little better tonight.
Rostock Max v3 (my first 3D printer)