[Solved] Odd Power Supply

Cybanimence · Post by **Cybanimence** » Mon Jan 18, 2016 9:33 am

So I've been putting together a Rostock Max V2, and I noticed something very strange.
The guide shows an ATX power supply, with multiple wires coming out of it. However, I received a very different power supply.
Here are some pictures:
(Sorry about the bluriness)
[img]http://i.imgur.com/dcEB8uc.jpg[/img]
[img]http://i.imgur.com/mGtbPE0.jpg[/img]

It has no brand on it, and no wires whatsoever, only a set of ports for power.
Am I missing something obvious, or is this not the right power supply? Thanks for any help.

KAS · Post by **KAS** » Mon Jan 18, 2016 9:48 am

You might be working off an older manual.

Try this one: http://download.seemecnc.com/rostockmax ... dition.pdf" onclick="window.open(this.href);return false;

Post by **geneb** » Mon Jan 18, 2016 10:05 am

There's no "might" about it.

BTW, cool use of the "earthquake" image filter.

g.

Cybanimence · Post by **Cybanimence** » Mon Jan 18, 2016 10:42 am

KAS wrote:You might be working off an older manual.

Try this one: http://download.seemecnc.com/rostockmax ... dition.pdf" onclick="window.open(this.href);return false;

There's a foruth edition!?!? Wow, was only on the second lol. Thanks!

teoman · Post by **teoman** » Mon Jan 18, 2016 10:47 am

Lay off the coffee man.

The power supply was changed at some point you have the newer version.

Welcome to the SeeMeCNC Community

[Solved] Odd Power Supply

[Solved] Odd Power Supply

Re: [Help] Odd Power Supply

Re: [Help] Odd Power Supply

Re: [Help] Odd Power Supply

Re: [Solved] Odd Power Supply