Injection molding machine

[DavidF]

Working slowly on building an injection molding machine. I figure that injection molding is the best way to go about tackling my ROV build
[img]http://i1102.photobucket.com/albums/g446/davidflowers1/Mobile%20Uploads/20160107_124109_resized.jpg[/img]

[mhackney]

You should mount that at the end of three sets of parallel arms such that it can be instructed to move in a plane while simultaneously ejecting plastic.

[DavidF]

NAH, It will be something more like this. Still working on the design...
[img]http://i1102.photobucket.com/albums/g446/davidflowers1/Screenshot_18.jpg[/img]

[teoman]

What will be the objective of your ROV?

[DavidF]

What will be the objective of your ROV?

To recover lost rings and jewlry at the local beaches with a suction dredge.

[fletcher]

Nice! I'm interested to see the results you get.

I love this little setup.
https://www.youtube.com/watch?v=4xwwWB2 ... Q&index=17" onclick="window.open(this.href);return false;

[DavidF]

Nice, but too small for me.

this is the one im sort of copying...
https://youtu.be/nV9hnJGpZCk" onclick="window.open(this.href);return false;
[youtube]nV9hnJGpZCk[/youtube]

[Jimustanguitar]

You should mount that at the end of three sets of parallel arms such that it can be instructed to move in a plane while simultaneously ejecting plastic.

Hell, add a y axis too and you've got yourself a monster Prusa

[teoman]

Just 1 or are you going to have a whole fleet of them?

[DavidF]

Just the one as far as i know. Its something i have been working up to for a couple of years now maybe one day i will actually get it built.
Started the injection molder 2 weeks ago. Expect to be a couple of months on it provided everything goes well.

[Generic Default]

Looks awesome so far, at first I thought you were bolting 3 plates of aluminum together but then I checked out the photobucket thing and saw you made it from a single big round bar.

Have you done calculations for injection pressure, clamping force, fill time, ect?

Will it be hand operated or automated?

[DavidF]

Injection pressure 5,000 psi. Clamping force, bit difficult to figure out but with the toggle clamp .125" above the horizontal lock point it is 25 tons. Injection speed hmm didnt look into it yet.
Its going to be a manual machine, but maybe one day i will automate it.

[DavidF]

I did some temporary wiring to test things out, well it took 20 min from cold to hit 300C......Slower than I would have liked but should still work ok
[img]http://i1102.photobucket.com/albums/g446/davidflowers1/Mobile%20Uploads/20160110_130942_resized.jpg[/img]

[fletcher]

Yep, DavidF I agree, the video you shared is a better sized machine! Love it.