Orion print

Show off your latest creations, whether 3D printed or not
Post Reply
Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Orion print

Post by Navkram »

Image

User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Orion print

Post by Eaglezsoar »

Very Cool!

neurascenic
Printmaster!
Posts: 217
Joined: Fri Nov 15, 2013 10:05 pm
Location: Denver Colorado
Contact:

Re: Orion print

Post by neurascenic »

Nav, That is very cool! Single print? or assembled?
I am a fool entrapped within my own wisdom.

User avatar
barry99705
Printmaster!
Posts: 707
Joined: Sun Aug 11, 2013 6:10 pm
Location: west ohio

Re: Orion print

Post by barry99705 »

neurascenic wrote:Nav, That is very cool! Single print? or assembled?


Has to be assembled. It's wider than the build platform.
Never do anything you don't want to have to explain to the paramedics.

Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Re: Orion print

Post by Navkram »

assembled, changed the springs to print better without support.
thingiverse... http://www.thingiverse.com/thing:127721

User avatar
barry99705
Printmaster!
Posts: 707
Joined: Sun Aug 11, 2013 6:10 pm
Location: west ohio

Re: Orion print

Post by barry99705 »

Now the even bigger question. Does it work?
Never do anything you don't want to have to explain to the paramedics.

Navkram
Printmaster!
Posts: 48
Joined: Thu Apr 11, 2013 10:30 pm

Re: Orion print

Post by Navkram »

yes it does work. not sure what you can catch but it does snap pretty good.
http://youtu.be/fNf977apJPU

User avatar
barry99705
Printmaster!
Posts: 707
Joined: Sun Aug 11, 2013 6:10 pm
Location: west ohio

Re: Orion print

Post by barry99705 »

That's just cool!
Never do anything you don't want to have to explain to the paramedics.

User avatar
SDI
Plasticator
Posts: 16
Joined: Mon Dec 16, 2013 4:36 pm
Location: phx, az

Re: Orion print

Post by SDI »

wow, scary!

nicely done!

Post Reply

Return to “What are YOU making?”