Vonoroi 3D Benchy
Posted: Sun Nov 06, 2016 8:47 am
Hi All,
Was printing 3D Benchy's so I thought I would print a Voronoi version of that venerable test object.
Some people were doubting the retraction effectiveness of the Nimble and I needed to prove it in action.
[img]http://zesty.tech/sites/zesty.tech/file ... enchy1.png[/img]
The Benchy behind it was printed at 60 mm/sec, just because I could. The Voronoi version was printed with 40 mm/sec.
Both in PLA, 0.35 nozzle and 0.2 mm layer height.
Also made a video of printing 4 different materials, just to show I could. It is on https://youtu.be/3KL9jXDX3p8
Lykle
Was printing 3D Benchy's so I thought I would print a Voronoi version of that venerable test object.
Some people were doubting the retraction effectiveness of the Nimble and I needed to prove it in action.
[img]http://zesty.tech/sites/zesty.tech/file ... enchy1.png[/img]
The Benchy behind it was printed at 60 mm/sec, just because I could. The Voronoi version was printed with 40 mm/sec.
Both in PLA, 0.35 nozzle and 0.2 mm layer height.
Also made a video of printing 4 different materials, just to show I could. It is on https://youtu.be/3KL9jXDX3p8
Lykle