Lathe Drive Dog

Show off your latest creations, whether 3D printed or not
Post Reply
ccavanaugh
Printmaster!
Posts: 298
Joined: Wed Dec 12, 2012 5:03 pm
Location: Indiana

Lathe Drive Dog

Post by ccavanaugh »

Couldn't find a drive dog with a long enough tang to engage the back plate. I'm only using it to polish a handle, so loads are not very large. Printed in PETG with 0.25 mm layers.
IMG_20160828_120444875.jpg
IMG_20160828_131249966.jpg
[url=http://forum.seemecnc.com/viewtopic.php?f=61&t=7998]MAX METAL[/url] ( [url=https://github.com/ccavanaugh/Max-Metal]Printable files[/url] )

[url=http://forum.seemecnc.com/viewtopic.php?f=35&t=8173&p=77818]Prometheus v2 Hot End Build[/url]
Qdeathstar
Printmaster!
Posts: 622
Joined: Wed Apr 13, 2016 7:42 pm

Re: Lathe Drive Dog

Post by Qdeathstar »

Nice looking print.... You can't print petg with the stock extruder can you?
ccavanaugh
Printmaster!
Posts: 298
Joined: Wed Dec 12, 2012 5:03 pm
Location: Indiana

Re: Lathe Drive Dog

Post by ccavanaugh »

Qdeathstar wrote:Nice looking print.... You can't print petg with the stock extruder can you?
Thanks!... Prometheus hotend on a Max Metal and BondTech extruder
[url=http://forum.seemecnc.com/viewtopic.php?f=61&t=7998]MAX METAL[/url] ( [url=https://github.com/ccavanaugh/Max-Metal]Printable files[/url] )

[url=http://forum.seemecnc.com/viewtopic.php?f=35&t=8173&p=77818]Prometheus v2 Hot End Build[/url]
Post Reply

Return to “What are YOU making?”