Welcome to the SeeMeCNC Community

(wasnt sure where to put this)

Does anyone have a full copy of /all/ the CAD files for the v3? Id like to make a different fan shroud, but a large majority of the files seem to be missing from the github repo (https://github.com/seemecnc/Rostock-MAX-v3).

Ive opened an issue (https://github.com/seemecnc/Rostock-MAX-v3/issues/1), but I figured id check around here too.

Some of the cad files, like the hot end are in a different repository.

try https://github.com/seemecnc/Machine_Ele ... 0%20Hotend

Ooo I did not see that repo. Thanks!

Solidworks 2017 for the files? Jeeez. At least its got the IGES files.

Turpinator wrote:Ooo I did not see that repo. Thanks!

Solidworks 2017 for the files? Jeeez. At least its got the IGES files.

They go into onshape.com pretty nicely.

briankb wrote:Some of the cad files, like the hot end are in a different repository.

try https://github.com/seemecnc/Machine_Ele ... 0%20Hotend

he280-assembly-model.png

I never saw the new HE in this detail, but it looks like the layerfanmounts would also retrofit to a V2 platform...
Aren't they sold separately?