Assembly

Having a problem? Post it here and someone will be along shortly to help
Post Reply
lv2311
Noob
Posts: 3
Joined: Mon Dec 17, 2012 8:50 pm

Assembly

Post by lv2311 »

Hi,

where can we find the list of all the Rostock parts alongside the photographs.

We are having trouble distinguishing between the different types of screws etc.

Thanks
LV

maready
Noob
Posts: 3
Joined: Mon Dec 17, 2012 5:41 pm

Re: Assembly

Post by maready »

There are a few jpegs here showing some of the parts....

http://seemecnc.org/download/RostockMAX/Assembly/

lv2311
Noob
Posts: 3
Joined: Mon Dec 17, 2012 8:50 pm

Re: Assembly

Post by lv2311 »

Thanks for the quick response!!

We found some great videos of 'Part Daddy' Steven assembling the various elements of the Rostock Max, and we got through all 6 videos of the assembly (which was vital to us in putting this together). However we cannot find part 7 to put together the final parts (extruder head and wiring etc).

Do you or anyone know where we can find it?

Thanks
Chorizo

geneb
ULTIMATE 3D JEDI
Posts: 5139
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Assembly

Post by geneb »

lv2311, Part 7 doesn't exist. I've written an assembly manual that folks seem to like. You can download it at http://www.geneb.org/rostock-max/rostoc ... manual.pdf - it covers the entire assembly, wiring and calibration. I was working on the "Your first print!" section last night when things went all pear shaped due to my inexperience. *facepalm* :) I hope to have that section published as soon as I get my issues straightened out.

If you have any questions, please yell! I'll be happy to help as much as I can.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

JakeCShake
Printmaster!
Posts: 92
Joined: Sun Dec 16, 2012 7:57 pm
Location: Rhode Island

Re: Assembly

Post by JakeCShake »

Totally agree.....also check Barnett's posts (use barnett to search) we had many of the same concerns and are just about ready to print.....if he hasn't started already. It's a weekend project for me at his home... : ((

Post Reply

Return to “Troubleshooting”