Trouble configuring Artemis 300 (December 2021)
-
- Plasticator
- Posts: 8
- Joined: Thu Jul 22, 2021 11:53 am
Trouble configuring Artemis 300 (December 2021)
I had an issue with my hot end and sent it to SeeMeCNC for maintenance. It was just delivered back to me. I Believe they updated the firmware. I am trying to connect it to wifi but when I enter the following commands as it states to do in the guide (M552 S0, M587 S"NetWorkSSID" P"password", M552 S1) the response I am getting from the printer is "Wifi reported error: no known networks found." does anyone have any suggestions? Is there a new way to connect the Artemis to wifi that I am not aware of? let me know. Thanks.
Re: Trouble configuring Artemis 300 (December 2021)
If you've got a WiFi network with both 2.4Ghz and 5Ghz radios AND use the same SSID for both, it could cause that issue.
g.
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects