Toothed Idler Wheels

Having a problem? Post it here and someone will be along shortly to help
Post Reply
BallardHill
Noob
Posts: 1
Joined: Mon Feb 01, 2021 3:10 pm

Toothed Idler Wheels

Post by BallardHill »

Can anyone advise whether these toothed belt idlers will serve to replace the smooth-circumferenced bearings used as belt idler wheels on the RMV2?

seemecnc.com/products/16-tooth-idler-pulley-1-pc-g-series-timing-belt-3mm-hole-x-6mm-belt
geneb
ULTIMATE 3D JEDI
Posts: 5234
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Toothed Idler Wheels

Post by geneb »

I suspect if it fits, it would work. If the idlers you have now are working, there's no reason to replace them however.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Troubleshooting”