Rostock Max V2 printing issues

Having a problem? Post it here and someone will be along shortly to help
Post Reply
Posts: 7
Joined: Sun May 17, 2020 2:52 am

Rostock Max V2 printing issues

Post by OC33 »

Hi all, have a Rostock Max V2 with ballcup arm and carriage upgrade. Have been dealing with a printing issue that causes the wall and infill not to connect.Have already calibrated level and H. radius as well as stiffening of the hot end/platform. Have also tried changing the arm length in the EEPROM to both 90.8 and 91.06 but still dont have a fix.

thank for your time.

below is a link to picture of the rough print quality and separation of infill and walls. ... Jg2EIAa9Iy
Post Reply

Return to “Troubleshooting”