new version 1!

Having a problem? Post it here and someone will be along shortly to help
Post Reply
Posts: 3
Joined: Sun Apr 21, 2019 5:29 pm

new version 1!

Post by imarcnut »

Hey everyone, I have a new Rostock max V1 and having trouble uploading the firmware. no instructions that I can find. BUT
can i use the instructions from the version 2 manual? Are the settings the same? i have the ez exstruder and top filament mount.

Posts: 1561
Joined: Wed Sep 23, 2015 2:55 pm

Re: new version 1!

Post by Xenocrates »

The instructions should be correct for the upload process. However, the calibration values such as the horizontal radius, and diagonal rod length, will be incorrect. There may be references in the code, or one of the people who've owned a V1, such as Geneb or Proto, could help you. Alternatively, you can upgrade the carriages and arms (I recommend this anyways). The thermistor values may also be incorrect.
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi

Post Reply

Return to “Troubleshooting”