can not connect to printer

Having a problem? Post it here and someone will be along shortly to help
Post Reply
grumpy
Plasticator
Posts: 7
Joined: Tue Jun 05, 2018 10:14 am

can not connect to printer

Post by grumpy »

i bought a rostockmax v3.2 a couple of weeks ago
things have gone ok until 2 days ago
when i try to connect the web interface i get

A JavaScript error has occurred so the web interface has closed the connection to your board. It is recommended to reload the web interface now. If this happens again, please contact the author and share this error message:

Version: 1.21
Message: ReferenceError: lineSegmentOffset is not defined
URL: http://rmaxv32/js/dwc.js
Line: 4:1551
Error object: {}


i submitted a help request to seemecnc 2 days ago but have not heard from them yet
this printer makes a really good looking door stop but i had hoped to get more use from it
the seemecnc support has really let me down
does any one here have suggestions
geneb
ULTIMATE 3D JEDI
Posts: 5232
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: can not connect to printer

Post by geneb »

I would suggest that you wipe the SD card and copy the data you downloaded from the git repository again.

This is something you should have already tried.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
grumpy
Plasticator
Posts: 7
Joined: Tue Jun 05, 2018 10:14 am

Re: can not connect to printer

Post by grumpy »

i planned to try that but if i do i would not be able to supply more info for seemecnc support if they so needed
i do not mind being down a bit if it helps them fix bugs but this is a bit much
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1393
Joined: Sun May 11, 2014 6:18 pm

Re: can not connect to printer

Post by Mac The Knife »

It appears that there is more traffic by SeeMeCNC people on their Facebook page than there is here. You might get a faster response there.
R-Max V2
Eris
Folger Tech FT-5 R2
grumpy
Plasticator
Posts: 7
Joined: Tue Jun 05, 2018 10:14 am

Re: can not connect to printer

Post by grumpy »

thanks for the tip
format the hard drive and start over seems to have made the problem go away
Post Reply

Return to “Troubleshooting”