Ez-Struder Removal?

Having a problem? Post it here and someone will be along shortly to help
Post Reply
derwoodvw
Printmaster!
Posts: 51
Joined: Wed Feb 26, 2014 2:45 am

Ez-Struder Removal?

Post by derwoodvw »

Does anybody out there know how to remove the white thumb wheel. It looks like an allen wrench but I can't find the right size. I have tried metric and standard sizes.
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7159
Joined: Sun Apr 01, 2012 5:26 pm

Re: Ez-Struder Removal?

Post by Eaglezsoar »

I believe that it is just a push on, pull off.
derwoodvw
Printmaster!
Posts: 51
Joined: Wed Feb 26, 2014 2:45 am

Re: Ez-Struder Removal?

Post by derwoodvw »

Thanks for the info
Holy1
Printmaster!
Posts: 344
Joined: Fri Jan 24, 2014 12:53 pm

Re: Ez-Struder Removal?

Post by Holy1 »

derwoodvw wrote:Does anybody out there know how to remove the white thumb wheel. It looks like an allen wrench but I can't find the right size. I have tried metric and standard sizes.

It just pulls off. You may need to pry ever so gently.
Orion to Cartesian http://forum.seemecnc.com/viewtopic.php?f=59&t=7808" onclick="window.open(this.href);return false;
Post Reply

Return to “Troubleshooting”