Basic Video on Changing Filament on Orion

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
User avatar
Brian.
Plasticator
Posts: 8
Joined: Thu May 15, 2014 10:15 pm

Basic Video on Changing Filament on Orion

Post by Brian. »

I bought some new orange filament to use for the Fall season and needed to swap out my filament.. so I decided to make this brief how to video.

https://www.youtube.com/watch?v=sT_7HXAQqWQ" onclick="window.open(this.href);return false;
Last edited by Brian. on Fri Oct 03, 2014 4:18 pm, edited 2 times in total.
User avatar
lightninjay
Printmaster!
Posts: 289
Joined: Sun Jul 13, 2014 12:49 am
Location: Tampa, Florida

Re: Basic Video on Changing Filament on Orion

Post by lightninjay »

Your link wasn't working, so I hunted down the correct one for you and posted it as embedded :)

[youtube]http://www.youtube.com/watch?v=sT_7HXAQqWQ[/youtube]
If at first you don't succeed, you're doing something wrong. Try again, and if it fails again, try once more. Through trial and error, one can be the first to accomplish something great.
User avatar
Brian.
Plasticator
Posts: 8
Joined: Thu May 15, 2014 10:15 pm

Re: Basic Video on Changing Filament on Orion

Post by Brian. »

Thanks!
User avatar
techstorage
Printmaster!
Posts: 80
Joined: Mon Aug 04, 2014 9:37 am
Location: Atlanta GA and Minneapolis MN

Re: Basic Video on Changing Filament on Orion

Post by techstorage »

Nice video, I never thought of disabling the steppers when I would do it. Good job.
Post Reply

Return to “General Tips 'N Tricks”