Glenn Berden from The MakerHive compare the Flexion Extruder against the SeeMeCNC EZ-Struder printing NinjaFlex
http://www.youtube.com/watch?v=9W1wZo4Kepo
Glenn Berden from The MakerHive compare the Flexion Extruder against the SeeMeCNC EZ-Struder
- U.S. Water Rockets
- Printmaster!
- Posts: 157
- Joined: Mon Apr 06, 2015 7:19 pm
- Location: Galway, NY USA
- Contact:
Re: Glenn Berden from The MakerHive compare the Flexion Extruder against the SeeMeCNC EZ-Struder
That's impressive for a stock EZStruder. I had to make a PTFE guide for mine to handle flexible filaments. But I used the full length Bowden. The flying Extruder seems to be making the real difference.