E3D V6 Foot on a HE280 hotend?

A place to talk about user-made mods and upgrades to their machines
Post Reply
drfuyutsuki
Plasticator
Posts: 15
Joined: Fri Mar 06, 2015 2:18 pm

E3D V6 Foot on a HE280 hotend?

Post by drfuyutsuki »

Has anyone tried to fit one of the new E3D V6 feet on a HE280 hotend?

I just killed another thermistor on my HE280 for no apparent reason and would like to switch to a different setup but don't have the funds to switch over to a V6 at the moment.

Could I take this: https://www.matterhackers.com/store/l/e ... gKNevD_BwE

and install it on the HE280?
drfuyutsuki
Plasticator
Posts: 15
Joined: Fri Mar 06, 2015 2:18 pm

Re: E3D V6 Foot on a HE280 hotend?

Post by drfuyutsuki »

Yes, it works perfectly.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: E3D V6 Foot on a HE280 hotend?

Post by geneb »

You can also swap to an SE300 heater block.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Mods and Upgrades”