Hey all,
Here are screen caps of my slic3r and Repetier host (printer) settings. Below is a link to the Repetier fimware Configuration.h file that I use.
So far the print quality is getting near perfect, still have to work out some tweaks to slic3r and the heated bed temperature.
http://www.reprap.org/wiki/SeeMeCNC/Rep ... guration.h
Sanguinololu 1.3a Repetier firmware/host settings
- michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Sanguinololu 1.3a Repetier firmware/host settings
Mike Latif
H-1 #3
H-1 #3
-
- Printmaster!
- Posts: 101
- Joined: Mon Mar 26, 2012 5:07 pm
- Location: Ariel, WA
Re: Sanguinololu 1.3a Repetier firmware/host settings
What slic3r version are you using.
Dave Sohlstrom
H-1 Tank
H-1 Tank
- michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Re: Sanguinololu 1.3a Repetier firmware/host settings
Hey Dave,
The version that comes with Repetier Host 0.40 is slic3r 0.7.1.
The version that comes with Repetier Host 0.40 is slic3r 0.7.1.
Mike Latif
H-1 #3
H-1 #3