Hello all

Introduce yourself to the community!
Post Reply
mmiscool
Noob
Posts: 2
Joined: Tue Apr 16, 2019 11:25 am

Hello all

Post by mmiscool »

Hello,

Figured I would introduce my self.

Name is Mike.

I have been working on some projects. You might recognize the handle from the ESP8266 basic project.

Currently I am going through the beginning parts of doing a 3d printing start up.

Been working on an automatic part ejector for 3d printers and just got a sweet brand new Rostock max V4 to play with.

Will probably be pocking around here. Mabe looking for some curaengine 15.04 slicer settings.
Talking about peoples experiences with water soluble filament.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Hello all

Post by geneb »

If you've got a v4, you're MUCH better off using Cura 3 or 4.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
mmiscool
Noob
Posts: 2
Joined: Tue Apr 16, 2019 11:25 am

Re: Hello all

Post by mmiscool »

I am open to doing this but only if using the curaengine.

I am currently working on some thing that requires that the workflow be handled completely with the command line.

If you know any example of using the new curaengine via the command line and the json settings ini file that would be greatly appreciated.
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Hello all

Post by geneb »

I would contact the Cura folks - I'm sure they can help you.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “New Member introduction”