Can't open Meshmixer

http://www.123dapp.com/
Post Reply
Cale
Printmaster!
Posts: 50
Joined: Mon Jul 14, 2014 1:12 am

Can't open Meshmixer

Post by Cale »

I've installed three of the 123d apps on my Windows XP laptop (123d Catch,123d Design,and Meshmixer).123d Catch works fine,but that's not the case for Meshmixer and Design.When I click on Meshmixer a tab pops up that says
The procedure entry point GetTickCount64 could not be located in the dynamic link library KERNEL32.dll.
I can't open Design because Meshmixer and Design are somehow connected.
I've looked up this problem on Google,but it didn't help me to well.It showed me mainly these three things.
1.A download that involved KERNEL32.dll. ,but it seemed more like a not so useful security system.
2.Programing something into my computer(the directions weren't too clear to me and I can't program whatsoever)
3.Upgrading my PC(can't afford it)
I need a better choice,or clearer instructions.


Thanks,Cale
zubrug
Plasticator
Posts: 5
Joined: Fri Jul 11, 2014 5:02 pm

Re: Can't open Meshmixer

Post by zubrug »

When I installed it I had the same issue so I removed it and all its folders and then reinstalled 123d design by itself and let it take me to the dependencies on its own. It will let you know you requires mesher, provides the link, install it and it all worked for me on xp and w7.
Good luck
Post Reply

Return to “AutoDesk 123D”