BOSSdelta 500 Field Service Bulletin Ground Wire October 2020

For that behemoth that is the BOSSdelta 500, the grand-daddy of deltas!
Post Reply
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

BOSSdelta 500 Field Service Bulletin Ground Wire October 2020

Post by PartDaddy »

We have issued a Field Service Bulletin (FSB) for the BOSSdelta 500 3D printer.

Please take a moment to download the official FSB document in this post and perform the correction.

Summary of this FSB:
The printer DC Negative output of the power supply needs to be connected to the AC
Ground (GND). This guide will provide instructions on how to perform the installation of
the grounding wire for each specific model. This guide also provides the proper method
of testing to ensure the service has been completed properly.

SeeMeCNC Field Service Bulletin Grounding Wire FSB Oct 14 2020.pdf
FSB-2020-Oct-14
(1.96 MiB) Downloaded 234 times
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
Post Reply

Return to “BOSSdelta 500”