Slicer profiles

For that behemoth that is the BOSSdelta 500, the grand-daddy of deltas!
Post Reply
elucas
Noob
Posts: 1
Joined: Mon Jan 11, 2021 12:00 pm

Slicer profiles

Post by elucas »

Just took delivery of a new BOSSdelta 500. Awesome machine! Just wondering if there were any slicer profiles for it other than the default one in the quickstart guide (PLA .7 nozzle, .2 layer) Thanks.
User avatar
PartDaddy
Printmaster!
Posts: 369
Joined: Fri Mar 23, 2012 4:03 pm

Re: Slicer profiles

Post by PartDaddy »

Hi,

In STEP TWO of our guide here
https://seemecnc.dozuki.com/Guide/Clean ... 41?lang=en
the last link in step two will download all of our factory posted slicing profiles.

In Cura, projects files end with 3MF. And slicing profiles only end with .curaprofile both which can be imported into Cura 4.6.2, and any of the .curaproject slicing profiles will be a very good starting point for the BOSSdelta 500.

Here's the link to SeeMeCNC GitHub shared slicing profiles
https://github.com/seemecnc/slicing-pro ... Cura%204-6

And the link to just immediately download all slicing information
https://github.com/seemecnc/slicing-pro ... master.zip
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
Post Reply

Return to “BOSSdelta 500”