Suggested PETG settings?

This is where you can discuss the RostockMAX v4!
Post Reply
Posts: 2
Joined: Thu Sep 24, 2020 11:48 pm

Suggested PETG settings?

Post by Mr.Moo »

Hello all,

I've been printing with PETG with mixed success.I can get pretty good parts, but always with significant stringing. I've tried a variety of extruder heat settings and retraction speeds as well as the suggested settings from the filament maker and the default settings that the Cura slicer has for PETG with a Rostock MAX v3 (mine is a V4). I can work around the problem by spiralizing my parts but that only works for certain things since you're limited to a single layer shell.

Does anyone out there have printer settings that they like to use with Cura and a Rostock MAX v4 for PETG that work well and minimize stringing?
Post Reply

Return to “RostockMAX v4”