Question about Cura 4.6.2

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
Post Reply
DeepsReddy
Plasticator
Posts: 13
Joined: Mon May 13, 2019 10:41 pm

Question about Cura 4.6.2

Post by DeepsReddy »

Hey Guys,

I have an Artemis and also have an Ultimaker S5.
As far as I can tell the only way to do dual extrusion on the Artemis is to clean install Cura 4.6.2 (this seems to be the latest version that the 3mf profile batarang imports into without having issues switching filaments upon execution)

Clean installing however involves uninstalling other versions of Cura.
My Ultimaker needs the latest version to run with the latest Firmware.

Is there a clever way to run 2 instances of Cura and preserve my Dual Extrusion ability for my Artemis? Anyone had success with the Artemis Dual Extrusion and running a Non-cura based slicer?

Any direction would be great.

DR
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Question about Cura 4.6.2

Post by geneb »

This might help you out: https://github.com/seemecnc/slicing-pro ... Cura%204-6

While the profiles are for 4.6, there's some dual extrusion ".curaprofile" files in there that may help.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Post Reply

Return to “Artemis”