Fix for your v3 calibrating.

The new for 2016 RostockMAX v3!
Post Reply
Kbigg
Noob
Posts: 4
Joined: Thu Nov 19, 2020 7:25 pm

Fix for your v3 calibrating.

Post by Kbigg »

So I had an issue with my v3’s calibration. Long story short, I hit the wrong button, it lost its mind, and just rammed itself into the Z tower or bed when i tried to do a full calibration. This fixed it, literally copy and paste this Into your G code editor, load it to your SD card and hit go.

M502
G4 S2
M500
G4 S2

Once this is done power cycle the machine. After that go back and do a full calibration and your done. I hope this helps anyone with similar issues.
Post Reply

Return to “RostockMAX v3”