I have a bunch of these 24v steppers Mitsumi M49sp-2k from printers thyat I have torn apart. Are they useful or will the high volts make them basically useless for cnc/printers?
Thanks
24v steppers
Re: 24v steppers
I think they should work as long as they get enough power
- michaellatif
- Printmaster!
- Posts: 357
- Joined: Mon Mar 26, 2012 1:34 pm
- Location: RTP, NC
Re: 24v steppers
Well. . . they are ok, they are 7.5 degrees per step. That will make precision and quality prints less possible. The biggest problem I think you will have is mounting them to the H-1.
Mike Latif
H-1 #3
H-1 #3
Re: 24v steppers
Thanks, I think I'll save them for something else. We were looking into using 123d Catch so it might work ok for a turntable.