Rostock Max V2 For Sale

[TyeGrady]

Unfortunately I have to downsize in my next move and I just can't find room to bring this thing with me across the country. I hope that I can get it to a good home and someone will enjoy as I have. It's currently located in San Diego, CA but I am willing to drive it myself to anywhere in the Los Angeles area and potentially a bit farther on a weekend.

It's a Rostock Max V2, purchased June 2014. I have upgraded the stock power supply with a Corsair CX750M modular power supply. I have to say, that upgrade was not as straight forward as I would have hoped but it did make a huge difference in maintaining the nozzle temperature when the fans kick on. I have also installed two additional part cooling fans on the head. The total time printing reads 20 days and 6 hours; filament used is 4280.1 Meters.

In addition to the printer, it will also come with lots of extra filament, parts, and parts for upgrades. I have many spare parts and hardware from the original build still and I purchased all the extra hardware to install Octoprint to run the machine remotely. If you aren't aware, Octoprint is a software that one installs onto a Rapsberry Pi to allow the 3D printer to be controlled and monitored remotely. I purchased a Raspberry Pi and a webcam for that purpose but never got to setting it up and installing it. Here is a link to the Octoprint page:

http://octoprint.org/

The list of extra filament is as follows:
SeeMeCNC PLA 1.75mm Brilliant Blue - Unopened 1KG
SeeMeCNC ABS 1.75mm Midnight Black - Unopened 1KG
SeeMeCNC ABS 1.75mm Artic White - Unopened 1KG
SeeMeCNC PLA 1.75mm Artic White - Opened, probably 100-200 g left.
Taulman Bridge Nylon 1.75mm Opaque - 1LB Unopened
Taulman 645 Nylon 1.75mm Natural - 1LB Unopened
Taulman t-glase 1.75mm Clear - ~1LB Opened, hardly used
Taulman 618 Nylon 1.75mm Natural - 1LB Unopened

From the current prices on the SeeMeCNC site it's roughly 200$ in extra filament alone. My asking price is 900$ OBO for everything.

I've attached some pictures below of some past prints and the printer itself. If anyone wants more pictures or anything else let me know.