Welcome to the SeeMeCNC Community

Well, activated for just a few printer posts. Currently Prusa, RepRap, Bigrep, and the Autodesk Generic FFF post. I modeled a test piece in Fusion, a 3" cylinder, 1" tall, with 3, 1" holes. The file size with normal slice settings was 17.5 Mb. After checking all of the appropriate box...

This test cube, is it a file provided by SeeMeCNC, or one that you created? If it is one that you created, it sounds like the slicer programs settings are wrong.

Did you use Arduino IDE 1.6.0? Anything newer then that won't work,,,,, https://seemecnc.dozuki.com/Guide/RAMBo ... 50?lang=en

Autodesk had just released the 3D printing capability just a few months ago, so the availability of a setup for the SeeMeCNC machines are nil. I played with the module a couple times to check out the interesting infills that they offer, but at initial release it was not quite there. I'll have to try...

What is your V2 using for a probe? Secondly, I'm not a fan of mattercontrol, so it would be to easy to say that's the problem,,, although I do recall they had a problem with their "auto calibrate" feature at one time. I have a V2, and never bothered with installing a probe to be able to au...

My default starting temperature for petg is 250.

They had to start somewhere. Also, reading the comments for the video, the Fusion 360 team appears to be monitoring the comments, and fixing things on the fly.


https://youtu.be/QWFRh-MdKxo

All better now. Thanks!!

I found MY problem,,,, It seems whomever did the "maintenance" on the forum, blew away the "Digi" themes for the board styles? My only option now is "pro"silver?

Kind of like when a radio station plays the same song, 24/7 before they do a format change.

I would just want all three to be pretty close to the same frequency.

For belt tensioning, I had considered using a guitar tuner app om my phone, to adjust tension,,,,,, Just never got around to it.

" In general, I think the quality of the printer has underperformed a bit for the price, and being billed as a "ready to print" printer." Like anything else, you are expected to have some experience. Most of us here built our printers from a kit, so yeah, the Artemis is "Rea...

Print really slow,,,, but it will still not be transparent,

Test the connections for the fan,,,,,,,,,

It won't be as bad as you think, Just don't get carried away and take it all apart. : )

By avoiding the clips when positioning the print in the slicer program.

Read up, Skippy. https://seemecnc.dozuki.com/Guide/Rosto ... 27?lang=en

Motor pulley setscrews starting to come loose maybe?

"Yes, just have first layer issues further out near the edges of the bed"
On my RMv2, I blamed that on tower rotation changes, and blamed it on humidity changes.

Have you printed anything yet?

Power supply is prolly going out.

I assume you re-used the stepper motors from the printers, for the new extruders. With both printers in the same room, I would compare the extruder motor temperature on each one,,,,, if the one that is skipping is cooler than the other one, I'd bump up the current some more.

I suspect it's a replacement for the Orion.

So I see a new forum titled "Scorpius™" So when will the details for this latest printer drop?