Welcome to the SeeMeCNC Community

Thank you Mac the Knife for posting the link to the new hotend assembly.
Thanks to Geneb for creating the instructions, great job!

Sorry, homework got the better of me and I have not got the time to work on it. I did just realize I bought the wrong relays (I got the DC-AC ones, which won't work). Would something like this do the trick to isolate the heated bed from the duet? These should work, my concern is if the traces on th...

raphaelm, I would like to welcome you to the forum and thank you for purchasing a Rostock Max printer.
Any time you need help or information do not hesitate to leave a message on the forum. That is why we are here, to offer help and assistance.
Happy Printing!

Noircogi wrote:I just got a shipping notification.

Thanks for letting us know, I bet you are happy!

The kisslicer.com site is now working.

What are your retraction settings?

The web site is down for me also, I hope that this is only temporary.

Under extrusion is a good possibility. Have you calibrated your extruder so that when commanded to push 100mm of filament that it actually extrudes that amount?
You can also temporarily use a different slicer and see if the same problems exist with the different slicer.

Thanks for reminding us. This has been discussed a great deal on this forum but a reminder is always good!

Here is one source of the PEI sheets with the adhesive backing. (12" X 12")
http://www.ebay.com/itm/Ultem-PEI-Sheet ... SwEjFXdt2G

Brian, when should these be available on your site?

Mac The Knife had a good suggestion. I would also ensure that the wiring to the hotend does not open when the Hotend is in this position. It sure looks like a filament binding problem or an electrical problem but only when the Hotend is in that position. Best of luck finding that problem and if you ...

DangerDong wrote:Thanks everyone for the replys. I went with the Artic Silver. Great stuff. Jerry

I hope you went with the stuff that Xenocrates recommended.
It cures very solid and once cured the parts cannot be separated.
Good recommendation and I am glad you followed it.

I ordered a kit the first day they showed up on the website and was under the impression shipping would commence on the 6th however the wording leads me to believe it will be after the sixth which I am sure gives them a little buffer if things are not quite ready. If anyone can provide an update we...

Thanks, PartDaddy for the high res pictures. A wonderful design.

I am glad it turned out to be something simple. Great troubleshooting!

This is excellent information and I thank you for taking the time to post it.

Thanks for the link to the troubleshooting guide, it should be helpful to a lot of users.

Thank you for the pictures. Great job!

And mounting plate for PSU and Electronics http://www.tricklaser.com/MAX-METAL-mounting-plate-for-PSU-Electronics-HPB-MAXMTL-PSUPLT.htm I got this installed okay, but it seems the smaller of the two plywood sheets tends to reverberate when the motors are doing certain things. It can be somewhat lou...

626Pilot, all that you have shown us are great organization tools but that workbench is really impressive! I love the looks of bamboo and that work bench rocks!
I clicked on the link and although it is expensive for shipping, I will have to save my pennies to purchase it. Thanks for your posting!

Thank goodness you cannot see your feet, that toenail fungus will grow fine without you seeing it. :) I just had a cat scan on my kidneys and it was great compared to an MRI, the MRI is so loud you get out of it with a headache. Anyway I am so glad to read your postings and having you back to pick o...

Hello from Ohio Ucfmop! Thanks for pre-ordering the V3, you will truly enjoy your purchase and as far as what you should know, you need to read the various topics found on this forum, ask questions when you need to and we will be able to help you. The assembly guide that you can download soon for th...

Hi and welcome to the Forum. You write excellent English with your native language being French, you are to be congratulated on your mastery of two languages. You are more than welcome to seek help here and to answer questions as you can. Thank you for your purchase of a Rostock Max printer! Happy p...

Welcome to the forum!
I can't help you on your decision to purchase 2 of the Eris or one of the Orion printers, that is strictly a choice to be made by you and your needs.
Whichever you decide to buy I hope that you will post pictures and participate in this forum. I just wanted to welcome you.