Welcome to the SeeMeCNC Community

We recommend using the LCD rather than gcode now. Also look for a *possible* firmware update at the end of the week related to probing.

First, ditch this multi point leveling. It's neat, but not how it should be done. One reason you got a v3 is because of the accelerometer auto probing of the HE280. We put some effort into this hot end and it will perform. So turn off software leveling conpletely. Also, when using software leveling,...

I'm looking forward to your posts! Great to meet you at the World Maker Faire in New York.

just posted the frame kit http://forum.seemecnc.com/viewtopic.php?f=48&t=1091 0 @travelphotog give me a few days, the millions of people from New York and honking and noise is still ringing in my head... i think after I put together the main frame kit, I can back-out the laser cut parts, then ma...

Come see us in Orlando Oct 22 & 23, 2016 !! http://www.makerfaireorlando.com/ We'll have "The PartDaddy" big Delta Printer and show off our new Eris and Rostock MAX v3. We'll have a few kits with us if anyone wants to save on shipping! Hang out with us at https://familab.org/ Saturday ...

https://www.seemecnc.com/products/frame-kit-for-rostock-max-v3 photo's soon, shipping approximately Oct 13, save $50 - introductory sale All major components for the Rostock MAX v3 will be for sale. Please read the product page carefully. We do not include t-slot or electronics because you likely al...

The RMAX v3 major components will all be sold separately. So the frame kit will not include any electronics or hot end. The RMAX v3 frame kit will cost $269. We'll run a temporary sale for existing customers who want to upgrade. This includes all hardware to assemble the top and bottom frames. Inclu...

Come see us this weekend at the World Maker Faire at the New York Hall of Science! And talk to SeeMeCNC crew John Oly, JJ, Andy or PartDaddy at the faire. You're also likely to spot special guests: Joel Telling - the 3D Printing Nerd and Richard Surroz. They'll be hanging out off and on at our booth...

It was a lot of fun and I enjoyed hanging out. While there's still a bunch of orders ahead of yours, we should be caught up and ready for your plant visit Friday! Thanks for choosing us, you'll really like this crowd here on our forum.

Here's some higher res pic's IMG_20160902_222228.jpg IMG_20160902_220621.jpg HE280's and a "jet" lower left. A No1 Phillips screwdriver installs the stainless metal jet insert for printing nylons and other 280C filaments. The metal insert increases the preheating and melt zone. It also pul...

TwoTone wrote:Will you off the board alone?

yes

@sLpFhaWK, I'm hi-jacking your intro post.... I prefer backwards compatibility! Back to 2012 that is, when we were the first company to lead the way into delta's. I always wanted people who support us to be able to use the latest and greatest, so where I could, I made sure to engineer improvements t...

few weeks...

The PTC fitting is by John Guest. It is called a "half cartridge" fitting. John Guest is a great company and has been around for a very long time. As for the hobbed drive gear, yes, exactly the same. John Oly will post these for sale this week! Look for them on our website. Thanks to the M...

Email our support if you haven't already. Second, post a pic of the hot end. Be sure the retaining clip is on the PTC fitting. Your PTFE tubing is fully seated. If it's got plastic in there, no worries. heat up the hot end, then force down the PTFE tubing. If the PTFE isn't seated, you can jam. And ...

Fill me in here. Who moderated what.

I try to read as much as I can, so my bad if someone answered this above... " Tincho85: Strangely, the values obtained were 30.37mm, which differs by 0.15mm from the 30.22mm that are used by the firmware....." The values in firmware are production measurements taken from the final injectio...

rocketry, hmmm, I have a rather large rocket needing launched by someone...

Great looking shop, sandcrab123! A lot of guys will find it interesting for sure. Did you know, when drilling / tapping aluminum, use only a few drops of rubbing alcohol. You'll be amazed if you've never tried it. Thanks for sharing.

Sweet! I want to print one on the PartDaddy now.

There is not a heated bed with the standard Eris. You can print many filaments. AlanZ, not sure if JJ designed a PI mount, but I know the guys have tested pi operation Xenocrates is correct, no adapter needed to attach the LCD to the mini RAMBo. JJ & Andy double checked the LCD works. I have not...

Here you go. 8-) This is literally work I just finished today. Have fun, happy hacking. https://github.com/seemecnc/eris_delta/tree/master/HE280%20Eris%20hot%20end Note the push to connect is not in there. It's pressed in john guest PTC fitting. The circuit board and components are perfect because t...

you'd have to make an adapter, we haven't done that