Welcome to the SeeMeCNC Community

The only time you /ever/ need to upgrade the Artemis firmware is if Duet3D publishes a new build that has a bug fix or new feature that you want or need. Unlike the RAMBo firmware, every single aspect of how the Artemis firmware works is controlled by the config.g, config-override.g, and other &quo...

Glacian, There is no code entered for Tool Change in my S3D profiles. There is only the typical simple start and end commands for the print. It must be relying on the firmware to do the filament swap when switching extruders. Hey AlanZ, already watched your youtube video, your printer is, simple pu...

OK, I just upgraded my printer (Artemis) with the Y-Adapter. Already did the changes to config.g file: MS63 P1 D1 H1 F1 G10 P1 S0 R0 I'm using Simplify 3D, so I created a Dual Extruder Setup (fff file). I can print with both extruders NOT AT THE SAME TIME. Individually both are working fine. My prob...

Yes, I forgot to mention, but the height has to be modified as well, otherwise the nozzle falls short to touch the bed. Just one question, are this values for the Artemis? I'm curious because mine has different values for Delta radius (R=150) and printable radius (B=145). Oh, never mind, this is V3...

Yes, I forgot to mention, but the height has to be modified as well, otherwise the nozzle falls short to touch the bed.

Just one question, are this values for the Artemis? I'm curious because mine has different values for Delta radius (R=150) and printable radius (B=145).

After about a year with my Artemis working fine, the Y axis started making noises while homing. Then, the axis started going down!

It took me a while, but after troubleshooting it happened to be a loose cable, now it is fixed.

Just reporting in case somebody else has the same trouble.

Cheers!

Oops! H = 540

For Artemis, I ended up modifying the printer height instead of the dive height for Z probe. the Artemis gains about 10mm in Z with this new arms.

It took me a while to realize what parameters to configure after upgrading to a Carbon Fiber rods, so, in case somebody else has same trouble this is what I did (and worked!): Update config.g - For command M665: 1) set Parameter Diagonal Rod Lenght (Parameter L) to new length = 340.5. 2) set Homed h...

Cool ... but with the Artemis this is a thing of the PAST!

well ... no for my V1, V2 and V3s LOL thanks then

OK, I think I solved it. The spring side of the red pin wasn't super springy so the contact was not consistent. I pulled it out, bent it out a bit and now it's good. It's now taking its time doing the first probe... I'll post again if I get a first print :) Thanks for all the help! The exact same t...

Looking around for pressure advance, looks like a duet setting... I'll look into it. I've tried 3.5-12mm retraction, stuck to 6.5 25-60mm/s retraction speed, right now it's at 25 since that's what the profile has. I upped the travel speed from 100 to 400mm/s and that seemed to do the most at reduci...

I haven't come to the forums for months, and now that I did, I found out about this sad news. I never met Carl in person, but I felt like he was an old friend, always writing something encouraging. If I didn't know the topic, just by reading his opinion (because he ALWAYS answer all posts), I could ...

I haven't come to the forums for months, and now that I did, I found out about this sad news. I never met Carl in person, but I felt like he was an old friend, always writing something encouraging. If I didn't know the topic, just by reading his opinion (because he ALWAYS answer all posts), I could ...

Mac The Knife wrote:Nice setup!!!

artexmg wrote:And, if you pair them with a good, old, nice bulb-amp, then you got yourself an epic set!

IMG_0814.jpg

Yes, I really like it!

Eaglezsoar wrote:Can someone unbork the system?

Unbork-eders crew!? :=)

I don't think it's on your end artexmg. I think something got borked and the forum isn't sending out emails any longer. g. Oh, I see! ... good to know, I just stopped "listenning" the forum ... I started to think, why all these smart guys have NOTHING to say anymore???? :-D :D Now, who's ...

Eaglezsoar wrote:Go to the bottom and subscribe to topic, this SHOULD ensure you get updates!

For some reason I do not get the notification (I didn't get the update of your post)

Probably the emails are filtered on my side.

BTW, even thought I am subscribed to this thread, I do not receive updates, and lately I had been soooooooo busy with "real life" work, that I barely have time to see the forum :-( I am writing this just in case somebody asks a direct question and I seem not to be answering. Life just happ...

And, if you pair them with a good, old, nice bulb-amp, then you got yourself an epic set!

This is how they look once finished ... they sound as great as they look

@Bubbasnow, this super big ass printer is plainly AWESOME!

How much do you say that you expend on this beauty? rough estimate, of course.

I want to build as big as yours, but before embarking I would like to know costs

Thanks!

This is awesome! I'm glad to see someone else building a big delta. It makes me feel better about my own project. I have a running forum over on the Delta Robot 3D Printers Google group discussing the big delta that I'm building if you're interested in taking a look. https://groups.google.com/forum...

Yes the upgrade kit is available at http://seemecnc.com/products/full-upgrade-your-rostock-max-to-a-v2" onclick="window.open(this.href);return false; Yes Sir! and I have mine already ordered! :-) And ... for those, like me, that ordered the "only laser cut parts", here is a prin...

I'm not sure why the STL's are super secretive. They were available for free before the website went down. Actually, there were two versions, one free an the second you have to paid for it. In any case, these files were available to download, under their licence, and it didn't allow to re-distribut...