Welcome to the SeeMeCNC Community

yep that is what it looks like.

ok looks like i found the problem. one of the contacts overheated somehow and melted the connection to the board. not sure how I missed that before. the rest of the board continues to work just fine but printing abs is not an option at this time.:( I guess I am going to need a new board unless there...

it does not show a temp on the LCD. Unfortunately my LED on the board has never lit up :( but it has worked flawlessly until now. no errors on connection. 11:11:11.628 : FIRMWARE_NAME:RepetierMAX 0.83SeeMe FIRMWARE_URL:https://github.com/seemecnc/RepetierMAX PROTOCOL_VERSION:1.0 MACHINE_TYPE:Rostock...

Yesterday I was printing a rather large part out of ABS and it finished fine. however, after attempting to start a new part later that night the Onyx Heat Bed will not heat any longer. I have checked the fuse and it is good. wires all seem to be connected properly. all other functions work fine on t...

Followed the instructions on the EZStruder just like the other stepper motors for wiring. But for some reason when I tell it to extrude it pulls back and vs versa. What wires do I need to switch around to make it work the right way.

Thanks,

Great manual, BTW, however just reviewed the version from Aug 2nd and the part I am missing is the setup for the hot end that includes the new spool on top config. all the pictures show the original version, nice orange color BTW, and with the spool on top this changes the ability to route the wirin...

Great manual. I was looking at the new assembly on pgs 85 to 88 for the top mount spool and extruder and noticed there is a text section on extending the control wires but no image instructions on how to best extend the 4 control wires and run those wires through the structure to keep it out of the ...

thanks,

Can someone identify what screws are to be used here? None of the ones remaining in my kit seem to work.