Search found 148 matches
- Wed Oct 22, 2014 4:00 pm
- Forum: Mods and Upgrades
- Topic: 3rd magnetic arm upgrade
- Replies: 24
- Views: 14319
Re: 3rd magnetic arm upgrade
Thread the Aluminum, screw on the ends to the exact length, then setscrew or clamp in place.
- Fri May 09, 2014 9:58 am
- Forum: General Tips 'N Tricks
- Topic: Window Tint Print Surface on the cheap!
- Replies: 22
- Views: 13083
Re: Window Tint Print Surface on the cheap!
I use a coat of glue stick then a light spray of hairspray on it, you can not pull it free without a hammer, until it cools down then it just pops off.
- Wed May 07, 2014 11:03 am
- Forum: Design Help
- Topic: Cost of Print
- Replies: 16
- Views: 15273
Re: Cost of Print
I keep getting "an error occurred" with the tool.jesse wrote:Here's a tool I made for 3d print pricing: http://jbcse.com/3d-print-cost-estimator.php" onclick="window.open(this.href);return false;
- Tue May 06, 2014 9:13 pm
- Forum: Design Help
- Topic: Cost of Print
- Replies: 16
- Views: 15273
Cost of Print
I have a Print I am doing it is about 3"x3"x1.5" envelope. Cura says 12.23m at 34 grams, I wanted to know what to charge for a piece like this and how others charge. I have seem on some sites $1.50 cm/3 and don't know how to equate it. Also I have seen setup fees. Any incite and advic...
- Mon Apr 28, 2014 5:34 pm
- Forum: The Lounge
- Topic: A John Oly caption that photo contest :)
- Replies: 37
- Views: 19096
Re: A John Oly caption that photo contest :)
"Don't get screwed, Buy a Rostock Max V2"
- Mon Apr 28, 2014 3:42 pm
- Forum: Rostock MAX
- Topic: Joe's Rostock Max
- Replies: 40
- Views: 20946
Re: Joe's Rostock Max
Owl Print
- Sun Apr 27, 2014 7:22 pm
- Forum: Mods and Upgrades
- Topic: An easy magnetic ball solution.
- Replies: 74
- Views: 34847
Re: An easy magnetic ball solution.
The originals have the ball end down.
- Sat Apr 26, 2014 10:30 pm
- Forum: GCode & Test Prints
- Topic: Anyone had their Rostock or Orion play music with steppers?
- Replies: 16
- Views: 16172
Re: Anyone had their Rostock or Orion play music with steppe
Here is the Mario Song. The problem with this and the other music on the cnc's is the machine uses a cortisian coordinate system to make the motor moves/sounds a Delta Printer has to only use the Z-Move to make the music. https://www.youtube.com/watch?v=v-W7FEZU8yg" onclick="window.open(th...
- Sat Apr 26, 2014 1:27 pm
- Forum: Rostock MAX
- Topic: Joe's Rostock Max
- Replies: 40
- Views: 20946
Re: Joe's Rostock Max
Printed a set of my 4 thumb screws for hold down clamps on the cnc machine.
- Sat Apr 26, 2014 1:22 pm
- Forum: ORION
- Topic: Printing large print.
- Replies: 4
- Views: 4117
Re: Printing large print.
I would make the body separate them make the pipes slide on similar to pvc piping, and make the middle support overlap and bolt together to hold into place.
- Thu Apr 24, 2014 9:34 am
- Forum: GCode & Test Prints
- Topic: Anyone had their Rostock or Orion play music with steppers?
- Replies: 16
- Views: 16172
Re: Anyone had their Rostock or Orion play music with steppe
I would imagine if you have dampers installed it may not sound as good, but will try it out. I just have not had time yet.
- Wed Apr 23, 2014 2:32 pm
- Forum: KISSlicer
- Topic: Soooo. Finally tried Kisslicer
- Replies: 20
- Views: 12882
Re: Soooo. Finally tried Kisslicer
How does Kisslicer compare to Cura?
- Wed Apr 23, 2014 2:31 pm
- Forum: General Tips 'N Tricks
- Topic: blue tape and Z calibration
- Replies: 4
- Views: 3631
Re: blue tape and Z calibration
I found it to be about 0.1mm I change the z-height.
- Wed Apr 23, 2014 2:29 pm
- Forum: GCode & Test Prints
- Topic: Anyone had their Rostock or Orion play music with steppers?
- Replies: 16
- Views: 16172
Re: Anyone had their Rostock or Orion play music with steppe
I did it on my CNC Machines, but not on the Rostock yet, I will see if I can get one going. I have a video somewhere of my 4x4 playing some.
- Thu Apr 17, 2014 7:06 pm
- Forum: What are YOU making?
- Topic: Check this out...
- Replies: 13
- Views: 7015
Re: Check this out...
Will be interested in what your setting are to pron it, Cura will not even generate g-code I imagine the walls are to close together, may have to size it up.
- Thu Apr 17, 2014 5:20 pm
- Forum: Troubleshooting
- Topic: Printer frozen solid
- Replies: 10
- Views: 5935
Re: Printer frozen solid
did you try to move the cheapskates with power off? I would imagine so. If power was on the motors are energized.
- Thu Apr 17, 2014 12:00 pm
- Forum: Simplify3D
- Topic: S3D Version 2.1.0 Released
- Replies: 4
- Views: 5528
Re: S3D Version 2.1.0 Released
I'm still debating if the cost is worth it, currently I use Cura and Repetier-host
- Thu Apr 17, 2014 10:29 am
- Forum: Troubleshooting
- Topic: Frustrating calibration issues
- Replies: 14
- Views: 9169
Re: Frustrating calibration issues
yes the lights do flash with ardiuno software, I was thinking about the eeprom config in repetier-host.
- Thu Apr 17, 2014 10:20 am
- Forum: Troubleshooting
- Topic: Frustrating calibration issues
- Replies: 14
- Views: 9169
Re: Frustrating calibration issues
I wonder when you make the changes to the eeprom if the read/write light flashes on the Rambo Board? If so this could be a way to ensure it is working properly.
- Wed Apr 16, 2014 11:11 pm
- Forum: The Lounge
- Topic: Help Designing a part for my vending machine
- Replies: 10
- Views: 6572
Re: Help Designing a part for my vending machine
This Should be very close and work for you.
http://www.thingiverse.com/thing:301507" onclick="window.open(this.href);return false;
http://www.thingiverse.com/thing:301507" onclick="window.open(this.href);return false;
- Wed Apr 16, 2014 8:26 am
- Forum: The Lounge
- Topic: Help Designing a part for my vending machine
- Replies: 10
- Views: 6572
Re: Help Designing a part for my vending machine
post pictures here?
- Mon Apr 14, 2014 9:43 pm
- Forum: New Member introduction
- Topic: Hello from Toronto, Canada
- Replies: 14
- Views: 8064
Re: Hello from Toronto, Canada
for the gaps try reducing your nozzle width.
- Mon Apr 14, 2014 4:07 pm
- Forum: Rostock MAX
- Topic: E3D V4 All metal hotend
- Replies: 875
- Views: 414653
Re: E3D V4 All metal hotend
where do you get the tiny bits?
- Mon Apr 14, 2014 4:05 pm
- Forum: Troubleshooting
- Topic: Generated g-code not found
- Replies: 2
- Views: 1860
Re: Generated g-code not found
I get the error more and more now, So I switched to CURA for g-code generation and only user repetier-Host for machine control.
- Fri Apr 11, 2014 9:04 pm
- Forum: Troubleshooting
- Topic: Walls of printed layer fan too thick?
- Replies: 8
- Views: 6182
Re: Walls of printed layer fan too thick?
If you were to enclose the bottom 1/2 the way to the end It will work better, I added tape to mine and it forced the air better towards the nozzle.