Search found 6 matches

by CaduTwo
Wed Oct 14, 2020 7:20 pm
Forum: Troubleshooting
Topic: Stepper Config for V2 Rambo to Duet Wifi 1.04
Replies: 2
Views: 110

Re: Stepper Config for V2 Rambo to Duet Wifi 1.04

TY. The motors worked as it was previously wired. One axis required direction flipping in the config. Steve from smcnc mentioned that they would only need to be rewired if they stuttered instead of moving. On to the next step of figuring out why the SE300 Z probe is triggered at rest state and only ...
by CaduTwo
Mon Oct 12, 2020 5:48 pm
Forum: Troubleshooting
Topic: Stepper Config for V2 Rambo to Duet Wifi 1.04
Replies: 2
Views: 110

Stepper Config for V2 Rambo to Duet Wifi 1.04

Hi. I'm converting a V2 to a Duet 2 Wifi 1.04. The Red/Green and Blue/Yellow stepper pairs were flipped on the prev. Rambo setup. Rambo GR BY Duet RG YB Should I be rewiring the Duet connector to match the Rambo or is that something that the prev. owner fixed in firmware and I should change the Duet...
by CaduTwo
Mon Sep 28, 2020 4:07 pm
Forum: RostockMAX v3
Topic: Rostock max V3 carriage upgrade
Replies: 2
Views: 112

Re: Rostock max V3 carriage upgrade

I was recently looking myself and didn't come across any. Like Geneb said, however, they probably aren't needed. The extra strength and rigidity of the metal over the injection molds isn't necessary since the main forces are so close to the guide rails. Any wiggle is more likely to come from the bea...
by CaduTwo
Sun Sep 27, 2020 5:41 pm
Forum: Rostock MAX v2
Topic: Upgrading my V2?
Replies: 14
Views: 1126

Re: Upgrading my V2?

Thanks again. I ended up going with the arms/carriage from here and the SE300, one with an OlssonRuby for fiber filaments but I'll probably need to figure out a specific process for calibrating that nozzle without smashing the ruby. I also have some spare pneumatic isolators to use as a base which s...
by CaduTwo
Wed Sep 23, 2020 8:02 pm
Forum: Rostock MAX v2
Topic: Upgrading my V2?
Replies: 14
Views: 1126

Re: Upgrading my V2?

Thanks for the quick response! It looks like they've sold out of the cf arms so I'd need to go with regular ball-cup arm kits and I can't find any info on tricklaser still existing. Are there important functional differences between the SE300 and a 713maker adaptor/e3v6/Duet Smart Effector combinati...
by CaduTwo
Sun Sep 20, 2020 9:19 pm
Forum: Rostock MAX v2
Topic: Upgrading my V2?
Replies: 14
Views: 1126

Re: Upgrading my V2?

Hello, thank you for the useful information. I'm a new owner of a used(28hr print time) V2. Do you still recommend those upgrades that look to be about $400-500 for the SE300 hotend, injection molded skates, Duet 2 board? I'm making respirator adapters due to the current shortage of couplers / filte...

Go to advanced search