Welcome to the SeeMeCNC Community

I was all set tonight to knock out a hotend upgrade I've had for like 6 months, so I get everything setup and it looks like I've gotten to step 5 and hit a brick wall. It says "Loosen and remove ONLY the wire from the Fan 0 + terminal on the top of the RAMBo board.".. Well on my Rambo boar...

Thanks for the reply, I checked all three towers with a square and one was slightly out of square, so I adjusted that, re-checked all the towers and then re-ran the calibration. See picture attached, it is still doing the exact same thing. The print on the right side lays down wonderfully and it loo...

Hi all, I have a semi-new H2 build and everything seems to be working great except for the first layer. I've attached a picture of a print in the center of the bed showing the first layer issue I'm having. Looking on the right side the skirt and the first layer are awesome, but once it starts to go ...