Welcome to the SeeMeCNC Community

I never got a PM but i sent you one. Just let me know how much and how to pay

just finished a new desktop build and need to know what file or folder to move from my old computer to the new one so I have all of my settings back. anyone know witch one?

ok so I received the e3d, ordered the right spacers, and am ready to put it together. I have the V3, what do I need to change to make the e3d work? the thermistor is at 75 k ohms and the heater cartridge seems to be a 25 watt. im guessing firmware changes?

hey no problem thanks for all your time and help! im going to give the e3d a shot, always love a new project for my v3

and is it a good purchase?

10-4 was wondering lol. guess I am going to get a e3d v6 now. where at?

am I even supposed to be using the old hot end?

I just don't see how this acp board is going to work? the lock ring seems like if anything I will need some spacers ?

that would be awesome!

so has anyone purchased the effector and under mount kit for their he280? I got my parts this week from 713 super fast and everything looks nice. issue is I purchased what I thought I would need but am not sure if it is correct or will even work with a rebuild of the he280. Tips, pics, or any info w...

do you have any V3 kits available? would like to purchase! can I pre order?

Yes the y conector. And matter control. I use a 45mm purge tower, no retraction, top speed of 35mms, first layer is set at 75% to get good detail. PLA/PHA filliment. As you can see i am still trying to adjust my retract settings, small track marks show through. but am having trouble keeping the firs...

Love the possibilities! Sure makes first layer tuning even more challenging

also the tower is only an outline, and on the tool change it pulled extruder almost out to the spool and when it was time for it to change back it only drove the filament a little ways back down

anyone working with the new adapter for the V3? having issues getting a good print. issues are my purge tower switches back and forth through materials, cant get the tower to print outer wall and then just solid infill diagonally, and not fully sure how to tweak my gcode like the before and after to...

I have been told KISS would be a great software for the new attachment for the V3. well I bought it and installed 1.5, figured how to get some premade setups for materials and basic print settings to open with it. having issues with knowing how to save settings I tweak, setting my retract on tool ch...

or do I just open these file with kiss and all is well?

ok so im a little confused. when using these settings how do I enter the Gcode in? I assume I cant just copy paste?

no I have not. I have been a little reluctant to change to it as I have tuned my printer and slicer to run great so far. I am willing to try but worried that I wont get it set up just right for my V3. do you know a good tutorial or set of instructions for the V3? what version to get or any other hin...

here is a look at the slice. I have tried changing almost every setting to get this figured out! HELP!!

Had to start a new one, typo was bugging me. So found out that in mattercontrol if i have build support ON then the purge tower has the weird dive problem. Next issue is it is still purging strange, prints with extruder 1 then goes to purge and changes fillament, runs a layer from outside in, then s...

ok so did my first test in matter control. First and main issue is that on my purge tower the first layer does what it should then the second jumps up 4mm and prints in the air followed by the hotend diving down back to the where the second layer is and then back up 4mm switching between filaments o...

Ok so I seem to have successfully installed the hardware and firmware for the new Duel kit! Problem is I have no idea how to set up for multiple colors in matter control or even where to start. I have had great success with my V3 so far and have learned how to get a pretty damn good print with a sin...

Alan z looks like you got it running great! Could you post your settings? Using PLA?

I don't want to install mine if I can't run just a single extrusion. Can I still run it with a single extrusion after I update the firmware?