Search found 69 matches

by Khayrisill
Mon Feb 25, 2019 3:42 pm
Forum: General Tips 'N Tricks
Topic: How to hot-swap filament on Rostock Max?
Replies: 2
Views: 3929

Re: How to hot-swap filament on Rostock Max?

Technically yes, IF your actual reel of filament is not empty yet. But this requires a lot of dexterity. And the technique depends on which version of Rostock you have (V3.2 Duet or V1 V2 V3 non Duet). Which is more doable with the DUET. Basically you want to pause the print, clear the head and swap...
by Khayrisill
Mon Feb 25, 2019 9:50 am
Forum: Troubleshooting
Topic: Mattercontrol version 2 - can't generate supports
Replies: 3
Views: 3233

Re: Mattercontrol version 2 - can't generate supports

I would like to tell you that Simplify3D gonna released a paid V5. So You should wait for it if you go in that direction. In the meantime, look at the other free options you will be able to make your own opinion without regretting anything.
by Khayrisill
Sun Feb 24, 2019 6:17 pm
Forum: Troubleshooting
Topic: Mattercontrol version 2 - can't generate supports
Replies: 3
Views: 3233

Re: Mattercontrol version 2 - can't generate supports

Hello, I can't help you with MatterControl, but in 2019 it is a slicer that is far from being ... good, to keep it simple. In my own opinion you should take a serious look to other alternative like Cura or KISSlicer, even Simplify3D (if you can afford it). You will find a lot of basic profile for th...
by Khayrisill
Sun Feb 24, 2019 5:57 pm
Forum: Troubleshooting
Topic: effector plate
Replies: 1
Views: 2069

Re: effector plate

Hello,

Do you have the ball joint version ? Verifies that the screws that hold the barbells (white parts) have not become loose.

A picture to illustrate would be appreciated.
by Khayrisill
Fri Jan 26, 2018 2:14 pm
Forum: Troubleshooting
Topic: Duet wifi extruder wiring confusion
Replies: 2
Views: 2964

Re: Duet wifi extruder wiring confusion

Hi buggy,


nop should be like this B-= Black B= Green A= Blue A-=Red
Untitled.png
Untitled.png (4.85 KiB) Viewed 2949 times
by Khayrisill
Tue Jan 02, 2018 2:38 pm
Forum: Members Marketplace
Topic: 713 maker hotend effector and hotend accelerometer probe
Replies: 1
Views: 3545

Re: 713 maker hotend effector and hotend accelerometer probe

I would be interested to buy your effector, its possible? what is the color ?
by Khayrisill
Thu Dec 07, 2017 3:51 pm
Forum: Troubleshooting
Topic: Duet WiFi with E3V6 dragging on plate
Replies: 36
Views: 21636

Re: Duet WiFi with E3V6 dragging on plate

Hello Char'les Grey,

Looks like you have something wrong in the config-override.g and to process config-override,.g at startup, you need a M501 command at the very end of config.g; or if you have a T0 command at the end of config,g then put it, right before the T0 line.
by Khayrisill
Fri Dec 01, 2017 11:51 am
Forum: Members Marketplace
Topic: MAX METAL Frame
Replies: 6
Views: 7177

Re: MAX METAL Frame

@gregc , and for the frame? still available?
by Khayrisill
Fri Nov 24, 2017 1:04 pm
Forum: The Lounge
Topic: Artemis(✓) or Rostock MAX v4 (X)
Replies: 20
Views: 17304

Re: Artemis or Rostock MAX v4

Salut, If you want a buy a new printer from SeeMeCNC I agree with Geneb about not consider the transferability of upgrades and other. For sur its depends of what upgrade you're referring to. But for me you'll end up with a lot of similar parts in doubles. So why not keep this V2 with its good upgrad...
by Khayrisill
Thu Nov 09, 2017 3:18 pm
Forum: Troubleshooting
Topic: Can I get an opinion on some perimeter attachment issues?
Replies: 13
Views: 8190

Re: Can I get an opinion on some perimeter attachment issues?

The towers is supposed to be square IF everything is seat correctly. You need to check first on the top and bottom, on the RostockMax there is a screw head to position the aluminum extrusion there should be something similar on your Orion. 2017-11-09 15_15_36-Rostock-MAX-v2-Assembly-Guide-4thEdition...
by Khayrisill
Wed Nov 08, 2017 8:55 pm
Forum: Troubleshooting
Topic: Bizzar nozzle temperature behavior
Replies: 4
Views: 3857

Re: Bizzar nozzle temperature behavior

Stupid question, did you run a PID auto-tune ?
When you say "I put a new hotend" that mean you upgrade for an H280 ?
by Khayrisill
Wed Nov 08, 2017 2:28 pm
Forum: Troubleshooting
Topic: Can I get an opinion on some perimeter attachment issues?
Replies: 13
Views: 8190

Re: Can I get an opinion on some perimeter attachment issues?

Yes Joe, behind the Acrylic cover, at the bottom of the 3 Tower,
2017-11-08 14_23_09-OrionUserManual-3rdEd.pdf.png
And looking for this assembly, the pulley on the steppers at the three tower (bottom), The shaft is the "rod" that comes from the stepper, inspect the area.
$_35.JPG
$_35.JPG (12.41 KiB) Viewed 7947 times
by Khayrisill
Wed Nov 08, 2017 11:52 am
Forum: Troubleshooting
Topic: Can I get an opinion on some perimeter attachment issues?
Replies: 13
Views: 8190

Re: Can I get an opinion on some perimeter attachment issues?

Yes true, I dont think the issue is in the tower too, but that's my routine checkup if I have a mechanical problem.
Good point about the hot end assembly specially after an upgrade.
by Khayrisill
Tue Nov 07, 2017 9:25 pm
Forum: Troubleshooting
Topic: Can I get an opinion on some perimeter attachment issues?
Replies: 13
Views: 8190

Re: Can I get an opinion on some perimeter attachment issues?

Hi Joe, You should look after a several things, I think it's mechanical issue. Start by checking if the three tower are perpendicular to the base, adjust the tension of the belts and on the same times inspect the carriage, did you have the new injection molded? if not I know there is an adjustment o...
by Khayrisill
Tue Nov 07, 2017 12:56 pm
Forum: Troubleshooting
Topic: Calibration Help
Replies: 7
Views: 5954

Re: Calibration Help

What do you mean by " speed 100" ? try retract speed 20 - 25 mm/s max and if its you print speed its too fast. My other advice would be to use a 4 mm z-lift for PLA. Indeed the filament could be a problem, but many other things come into account before that. So, try reduce the speed and pr...
by Khayrisill
Mon Nov 06, 2017 11:18 am
Forum: Troubleshooting
Topic: Calibration Help
Replies: 7
Views: 5954

Re: Calibration Help

Hello, Looking at the Hotend it seems to extrude fine. Are you saying that the incorrect seating of the bowden tube could be impacting retraction? Thanks Oh YES, because when you retract the filament go backward and remove over pressure but if the bowden is not correctly seat a "puck" is ...
by Khayrisill
Sun Nov 05, 2017 7:06 pm
Forum: Troubleshooting
Topic: Calibration Help
Replies: 7
Views: 5954

Re: Calibration Help

Hi bwalch, Your settings look good, maybe a little too much retraction, BUT are you sure that the printer retract ? its look like for little move the printer doesn't proceed to retract. You can find this parameter in the slicer depending on which one you use it is with the parameters of retraction i...
by Khayrisill
Thu Oct 26, 2017 3:06 pm
Forum: Members Marketplace
Topic: MAX METAL Frame
Replies: 6
Views: 7177

Re: MAX METAL Frame

Hello,

Your Trick Truck X Mini Carriages are they still available ?

Thanks
by Khayrisill
Wed Sep 27, 2017 11:13 am
Forum: Troubleshooting
Topic: RAMBo Problems?
Replies: 25
Views: 14674

Re: RAMBo Problems?

Mac The Knife wrote:What is the voltage before you power up the heaters?

Personally, in my case I have always 12.3 V
by Khayrisill
Tue Sep 26, 2017 1:24 pm
Forum: Troubleshooting
Topic: RAMBo Problems?
Replies: 25
Views: 14674

Re: RAMBo Problems?

Hi guys,

Have a similar problem, but I never found why. Sometimes When I start the printer the bed and hotend temperature that is display on the LCD screen is not constant even without the heat powered on. I need to restart it several times before seeing stable temperatures.
by Khayrisill
Wed Sep 13, 2017 10:02 am
Forum: Troubleshooting
Topic: Defective part file?
Replies: 5
Views: 5354

Re: Defective part file?

Good Morning, I would say, one parameter is not correct when you slice with MC if its work with an other slicer. Honestly, for looking at the Gcode I do not really look at it, but at the beginning of it I verify if the value for the extrusion diameter is correct, the temp, the speed... I never print...
by Khayrisill
Tue Sep 12, 2017 3:39 pm
Forum: Troubleshooting
Topic: Defective part file?
Replies: 5
Views: 5354

Re: Defective part file?

Weird.. Hello, You can export the GCode and drop it here. But yes, you should try with an other slicer especially if your other parts are working. (cura, Slic3r...) Your description looks like a temperature problem, did you check in the slicer if the temp for the layer is always the same ? Your firs...
by Khayrisill
Wed Jul 19, 2017 10:30 am
Forum: General Tips 'N Tricks
Topic: A Strategy for Successful (and Great) Prints
Replies: 69
Views: 150547

Re: A Strategy for Successful (and Great) Prints

geneb wrote:As far as I know, OctoPrint uses mm/sec for movement.

g.
Hi G.
[img]http://bbmail.co/semecnc/octoprint.png[/img]
by Khayrisill
Tue Jul 18, 2017 11:28 pm
Forum: General Tips 'N Tricks
Topic: A Strategy for Successful (and Great) Prints
Replies: 69
Views: 150547

Re: A Strategy for Successful (and Great) Prints

Hi @mhackney, Im not sure to understand the step #9 «Know Your Filament», You said to extrude 50mm at 1mm/s, wich means 3600 mm/min with octoprint interface. But I can't even extrude 10 mm like this, is so fast.... I use a black ABS from Esun and Im already at 260°c. I checked with my thermocouple. ...

Go to advanced search