Welcome to the SeeMeCNC Community

Hi Brian! Thanks for the reply, I don't have access to a machine shop (unless you count Mhackney as that haha) to make those sweet metal brackets, but I should just 3d print something similar and that should work for me. I also have a regular Titan extruder I am currently using on my Kossel, that ma...

Good day everyone. I attended MRRF a couple weekends ago and I purchased a bunch of parts from Brian over at Trick Laser and I must say the quality is amazing. I'm currently building a Metal Max complete with all the fixings from Brian, and I am nearly complete but I hit a snag and I am seeking help...

Jasper, Your site shows the Berd Air kit out of stock, but it shows stock on the pumps and tubes. I would like to order one kit for the Eris, one extra pump to replace the one on my Max and two PMW kits. How or when can I place such an order? I should be getting more pumps in shortly, If you want I...

Never ending process... My Rostock Max V2 has been through a bit too :) I am currently fitting the new HE print head.. I was going to go that route, might have been around the same cost but I'm happy with what I have. Video of it in motion coming soon! Isn't it always. As far as the fan on the v6 g...

Built a White V2 Rostock Max, and it's been great. I've broken a couple things, and learned a bunch since the start but where I am at now I couldn't be any happier. It started off as an early V2, so I upgraded the arms and the skates, then I went to an e3dv6 hot end with a 713 maker mount. I bought ...

The video is in the link I sent you to the Repetier firmware site last night. It does not matter what type of probe you are using so FSRs look exactly like a simple switch from the firmware's perspective. In fact, that is one of the primary features that little JohnSL board provides, it takes the r...

I should also note, I Did watch this video here

https://youtu.be/L9URtv2LqKc

and it seems easy to follow, but I have no idea if thats the same using FSR's as it is with his switch.

So I got the FSR kit from Ultibot (http://www.ultibots.com/fsr-kit/) and I have them all wired up, and installed and hardware wise they seem to work rather well. https://youtu.be/3LP-_4En7u0 [img]http://i.imgur.com/5RdKT4q.jpg[/img] Software on the other hand, is where I can't make heads from tails....

@ sLpFhaWK an alternative would be FSR leveling. I'm currently using these on ALL my printers and they are easier to install than retrofitting the accelerometer board. I was actually told about the FSR leveling I just wasn't sure how to get it done on the max. Care to show me some photo's and what ...

Hello fellow owners. I have a v2 Rostock and I am having 1 hell of a time calibrating to get prints to stick on the outer edge. I've watched and followed the how to video numerous times and I thought I had it dialed in pretty good, but whenever I try and run a test print using simplify 3d it's fine ...

Sorry to hear about the struggles, but just a quick FYI I bought my printer used and partially assembled, and because of the cost of insurance with ups ground shipping the seller had to pay over $300 to ship it. Just food for thought, if you can sell it locally that may be better for you.

Mattercontrol imo is a pretty shitty slicer. I use Simplify 3d as mine for my romax v2 and i have wonderful results. If the fiance wasn't sleeping for work I'd print this calibration print just to see how dialed in my settings are, but if you don't wish to spend $150 for a slicer I wouldn't blame yo...

I did not run into traffic on my way home thankfully, it was a long day and we didn't hit the road until 9:30 that night before heading home. I know you're a busy man, but let me know when you're free and if it works out for both i'd like to be there, maybe we can record a build log for it and post ...

Hey man when do you think you'll receive it? I'd love to possibly head over and assist or just watch the build and to see the new v3 in action. I also went to NYC on Wednesday, small world lol

hopefully the subie will be okay!

If you're using simplify3d, set the Extrusion width to Manual with the value of your nozzle diameter. You might want to print a few hollow cubes to measure and adjust your extrusion values. Appears to be under extruding, like Eaglezsoar said. Oh it's been set to manual. I learned that months ago on...

Mac The Knife wrote:Murphy is pretty good about not breaking something that you have spares for. I learned that racing radio controlled cars.

Murphy is a sumbitch when it comes to r/c cars. no matter what you have extra he finds a way to break something you don't have and is on back order to get. i hate him. lol

This post has the part numbers in it http://forum.seemecnc.com/viewtopic.php?f=55&t=1001&p=4209&hilit=Littlefuse#p4209 I got the part # from the wiki from the link above and ordered 10 of them from Digikey. Hopefully they ship 1st thing tomorrow and arrive Wednesday. MN to MA priority h...

If you can not wait, and are certain you have resolved the issue that blew your fuse, here is a link to a solution myself and some other forum members have used in order to hold out until our replacement fuses arrived. link Well I will definitely say, that is a creative way to fix the problem. Luck...

This post has the part numbers in it http://forum.seemecnc.com/viewtopic.php?f=55&t=1001&p=4209&hilit=Littlefuse#p4209 I got the part # from the wiki from the link above and ordered 10 of them from Digikey. Hopefully they ship 1st thing tomorrow and arrive Wednesday. MN to MA priority h...

https://www.amazon.com/Surface-Mount-Fu ... no+2+fuses

Would those work? I really don't know which ones are needed. A google search keeps pulling up circle type fuses.

You have to pull it out of the board and test it with a meter, they don't look any different when they are blown. SUCCESS! I tested the F2 Fuse, and the F3 fuse and i googled that if it reads under 1 ohm it's good and the other didn't read at all.. so now the question is where the hell do i get the...

Well, I looked at them, but I don't know what it would look like if it was bad. It's tiny and I can see nothing wrong with it that I can tell.

I did not check all 3 fuses, because I only thought there was 1. Let me go check it out and I will take a look.

Good day my fellow people. I am having an issue w/ my Rostock Max V2 Rambo board. today I was printing with some new PETG + Filament, and everything was going good but it jammed up towards the end of a print and so I cancelled the print and noticed that I had some Filament gunked up on the nozzle, s...

So I ended up going with this, http://catalog.cshyde.com/item/3d-print ... a-3d-12x12 and it's perfect. Same stuff on the MK2 Prusa. I haven't installed it, I'm gonna to do it now I think and 1st print will be tomorrow!!