Welcome to the SeeMeCNC Community

VERY NICELY DONE. I do like the cabinet, not as much for heat but more just for dust and dirt. But the last few weeks here heat is the last thing needed for printing. With outside in 120s I just need to open a window and turn off the AC. The cabinet reminds me of a scientific lab cabinet for balance...

Well, I can not say if I agree or disagree with the posting, if not simply due to the fact I have paid into social security and medicare etc. for a great portion of my working life but yet am not able to enjoy collecting a return on my contributions. Some one else will enjoy them for their retiremen...

left side controller handle

Spec sheet shows a TO220 package which would allow a machine screw mount. Yes still issue of the 150 max temp. Maybe the KYT84 silicone temperature sensor as it is suppose to be virtually liner.

I would like to look at using an LM35 instead of a thermistor (or actually a simular device that can take the heat). Of course one more wire to add to the head, as well as more changes to the Arduino. And the issue with temperature would be the first issue to tackle.

Well after spending the last couple days squeezing in a pair of 22GA wires into two of the tower legs, I though I had meet my need for extra wire. I have no plans for a dual extruder as I hope to use Pallete for multi color printing. So 4 extra wires worked, until I put the wire and tube in place an...

I just finished installing two of the tower legs and started noticing the very close wire to idler and looks like if left to Murphy that rubbing will occur. I did add two 22GA wires to one tower tube for LED lighting but that is a very minimal size change. I also had planned to slip heat shrink over...

Hello all, It has been weeks ago I bought my Rostock Max v2 kit with Matter control. Expected to have all finished and printing but one delay or another has slowed things. Worst was last 8 days in the hospital for for a major internal blood leak, but even being a quart low on oil is hard to keep th...

As previous posted when I build projects I kind of look for the easier or simpler way of doing things, I would say better but for every better there is always another way that is better to some one. OK, issues with the #6-32 nylon lock nuts in laser cut pockets. I had several issues with three of th...

When I build projects I kind of look for the easier or simpler way of doing things, I would say better but for every better there is always another way that is better to some one. So I will post several helpful thoughts to share on the Rostock MAX V2 assembly. This post is on the bearings. While I m...

Already had them twisted and heat shrink labels on each end before stopping.

Hello all, It has been weeks ago I bought my Rostock Max v2 kit with Matter control. Expected to have all finished and printing but one delay or another has slowed things. Worst was last 8 days in the hospital for for a major internal blood leak, but even being a quart low on oil is hard to keep thi...