Search found 370 matches

by PartDaddy
Tue Sep 28, 2021 1:44 pm
Forum: Artemis
Topic: Once more with the Duet Wifi - totally stuck on the no networks/wifi idle msg
Replies: 12
Views: 6833

Re: Once more with the Duet Wifi - totally stuck on the no networks/wifi idle msg

Hi guys, thank you for posting your solution of naming the SSID's individually for both 2.4GHz and 5GHz at the router. Sometimes there's no explanation why it happens, perhaps it is something within the DHCP router itself.. certain models.. ? If I come across this with another customer, we'll certai...
by PartDaddy
Fri Jun 11, 2021 5:39 pm
Forum: Duet
Topic: Duet2 RepRapFirmware v3.2.2 Upgrade
Replies: 2
Views: 4014

Re: Duet2 RepRapFirmware v3.2.2 Upgrade

I recommend any version 2.xx and lower should re-install firmware as the guide suggests. The BOSSdelta and Artemis are all working well. Just follow the guide. I'll repeat this... follow the Service Bulletin for migrating to v3.2.2 found on the shared Google Drive. :) As of this post, v3.2 needs a l...
by PartDaddy
Thu Jun 10, 2021 8:39 am
Forum: Rostock MAX v2
Topic: Rostock MAX v2 Print not smooth
Replies: 16
Views: 12452

Re: Rostock MAX v2 Print not smooth

Speeds in the EEPROM can be adjusted down. Slow the "jerk" or "instant speed change" down considerably. The accelerations might be cut by 50% to start.

Then printing a little slower, say 60-70 will help with "ringning" issues you show in the photo.
by PartDaddy
Thu Jun 10, 2021 8:35 am
Forum: Duet
Topic: Duet2 RepRapFirmware v3.2.2 Upgrade
Replies: 2
Views: 4014

Duet2 RepRapFirmware v3.2.2 Upgrade

Let's update the printers! Let's first say a big THANK YOU to dc42, Roland, Tony and whole Duet3d crew for such AMAZING boards and firmware. SeeMeCNC is transitioning to RepRapFirmware version 3.2.2, and after years of reliable service from versions 1.19, 1.21, and 2.02RTOS, we are taking the plunge...
by PartDaddy
Thu Jun 10, 2021 7:24 am
Forum: General Announcments
Topic: MRRF 2021 & SeeMeCNC
Replies: 0
Views: 5670

MRRF 2021 & SeeMeCNC

SeeMeCNC will be streaming live from the factory for MRRF 2021. We'd love to attend in person, however the pandemic is still a thing. Nevertheless, we're excited about streaming live.

We'll post our SeeMeCNC Midwest RepRap Festival schedule soon. :D
by PartDaddy
Tue Jan 26, 2021 11:43 am
Forum: Artemis
Topic: Cura 4.8 setup woes now...
Replies: 13
Views: 8197

Re: Cura 4.8 setup woes now...

Cura 4.8 won't work. It won't likely be fixed until the next release. We don't make software, we only advise customers to use what is proven to work, tested, and solid. Take another look at your email from SeeMeCNC technical support Saturday at 4:20pm. no YAT, no USB connecting. We do not run our pr...
by PartDaddy
Sat Jan 23, 2021 1:02 pm
Forum: BOSSdelta 500
Topic: Slicer profiles
Replies: 1
Views: 5902

Re: Slicer profiles

Hi, In STEP TWO of our guide here https://seemecnc.dozuki.com/Guide/Clean+Cura+Slicing+Software+Setup/141?lang=en the last link in step two will download all of our factory posted slicing profiles. In Cura, projects files end with 3MF. And slicing profiles only end with .curaprofile both which can b...
by PartDaddy
Thu Oct 15, 2020 2:42 pm
Forum: BOSSdelta 500
Topic: BOSSdelta 500 Field Service Bulletin Ground Wire October 2020
Replies: 0
Views: 5665

BOSSdelta 500 Field Service Bulletin Ground Wire October 2020

We have issued a Field Service Bulletin (FSB) for the BOSSdelta 500 3D printer. Please take a moment to download the official FSB document in this post and perform the correction. Summary of this FSB: The printer DC Negative output of the power supply needs to be connected to the AC Ground (GND). Th...
by PartDaddy
Thu Oct 15, 2020 2:41 pm
Forum: RostockMAX v3.2
Topic: Field Service Bulletin Ground Wire October 2020
Replies: 0
Views: 6217

Field Service Bulletin Ground Wire October 2020

We have issued a Field Service Bulletin (FSB) for the RostockMAX v3.2 3D printer. Please take a moment to download the official FSB document in this post and perform the correction. Summary of this FSB: The printer DC Negative output of the power supply needs to be connected to the AC Ground (GND). ...
by PartDaddy
Thu Oct 15, 2020 2:40 pm
Forum: RostockMAX v4
Topic: Field Service Bulletin Ground Wire October 2020
Replies: 4
Views: 5589

Field Service Bulletin Ground Wire October 2020

We have issued a Field Service Bulletin (FSB) for the RostockMAX v4 3D printer. Please take a moment to download the official FSB document in this post and perform the correction. Summary of this FSB: The printer DC Negative output of the power supply needs to be connected to the AC Ground (GND). Th...
by PartDaddy
Thu Oct 15, 2020 2:15 pm
Forum: Artemis
Topic: Field Service Bulletin Ground Wire October 2020
Replies: 0
Views: 6126

Field Service Bulletin Ground Wire October 2020

We have issued a Field Service Bulletin (FSB) for the Artemis 3D printer. Please take a moment to download the FSB document in this post and perform the correction. Summary of this FSB: The printer DC Negative output of the power supply needs to be connected to the AC Ground (GND). This guide will p...
by PartDaddy
Wed Sep 02, 2020 8:02 pm
Forum: Troubleshooting
Topic: Help me resurrect my Rostock MAX v1.
Replies: 16
Views: 12154

Re: Help me resurrect my Rostock MAX v1.

Woke up in middle of the night, 36 acrylic then it was decided melamine would survive shipping much better (and it did ;) ) I wanted to post here and just express my appreciation for the 10,000's of customers who have supported my business and brand. I'll be helping through the SeeMeCNC support syst...
by PartDaddy
Mon Jun 08, 2020 8:25 am
Forum: Members Marketplace
Topic: Rostock Max V2 (Disassembled) in SF Bay Area
Replies: 5
Views: 5957

Re: Rostock Max V2 (Disassembled) in SF Bay Area

This is an amazing deal. The steppers and RAMBo control board lone is worth this price.
by PartDaddy
Mon Jun 08, 2020 7:46 am
Forum: New Member introduction
Topic: Greetings
Replies: 1
Views: 3336

Re: Greetings

Hi Jarvis, Original instructions can be found here:
https://www.seemecnc.com/pages/downloads
by PartDaddy
Mon May 11, 2020 7:35 am
Forum: Artemis
Topic: Simple Two Color Prints/PETG/Linear Advance
Replies: 1
Views: 2757

Re: Simple Two Color Prints/PETG/Linear Advance

In Cura 4.5, from the menu, choose "File" then "Open file(s)..." and select the following file form our GitHub download. Then uncheck "Dual Extrusion" in the slice setting. A purge tower will not print and the printer will switch.
3MF-file-quick-start
3MF-file-quick-start
SeeMeCNC Cura 45 Quick Setup.jpg (161.33 KiB) Viewed 2693 times
by PartDaddy
Sat May 09, 2020 2:46 pm
Forum: Development Topics
Topic: In line filament dryer.
Replies: 4
Views: 10896

Re: In line filament dryer.

Nylons and even Carbon Fiber PETG benefit. Here's my setup, bucket was curtesy of Atomic Filament. metal bucket with 4mm PTC fitting (SeeMeCNC Part No. 38832) moisture strip from one of my Atomic CF PETG rolls in bottom, these are reusable desiccant dryer, rechargeable type does not need plugged in ...
by PartDaddy
Sun May 03, 2020 12:48 pm
Forum: BOSSdelta 500
Topic: What do you print on your Boss??
Replies: 3
Views: 5096

Re: What do yuo print on your Boss??

Wow! Really nice looking model. Did you snap a photo while printing one of the parts?

Space is the place... :D

Thanks for sharing! ~Steve
by PartDaddy
Wed Mar 18, 2020 12:40 pm
Forum: General Announcments
Topic: Forum maintenance update...
Replies: 9
Views: 10943

Re: Forum maintenance update...

Not sure what has been going on, but this is the first time I have been able to see the forums for weeks. Welcome back...or glad to be back...whichever applies. The SeeMeCNC forums now reside in a safe secure place on the interwebs, with special thanks to @beernutz & @geneb !!! Team SeeMeCNC is...
by PartDaddy
Tue Mar 03, 2020 2:40 pm
Forum: General Announcments
Topic: 2020 MRRF KIT OFFER from SeeMeCNC
Replies: 0
Views: 3015

2020 MRRF KIT OFFER from SeeMeCNC

THIS SALE has been replaced by the SPRING 2020 Sale due to the delay in MRRF. :) MRRF 2020 - for a limited time the RostockMAX v4 KIT is back! Only release 20 kits for sale at a huge 28% off! Kit offer for pickup at MRRF for Thursday before the event at the SeeMeCNC Factory. :D MRRF2020 KIT OFFER.JPG
by PartDaddy
Fri Feb 21, 2020 5:33 pm
Forum: General Announcments
Topic: Video stream
Replies: 0
Views: 2835

Video stream

We're printing Alien Chess Set from thingiverse. Sliced with Cura 4.5.

Watch live. We usually have the shop nest cam on the printers.

https://www.seemecnc.com/pages/videostream
by PartDaddy
Fri Feb 21, 2020 5:32 pm
Forum: Cura
Topic: Cura 4.5 Profiles
Replies: 7
Views: 12762

Cura 4.5 Profiles

Very happy with the performance of the new version of Cura 4.5 and we've been busy updating new github.com/seemecnc slicing profiles this week. They fixed the single hotend multiple extruders in this release. Very happy with the performance too. https://github.com/seemecnc/slicing-profiles We catego...
by PartDaddy
Mon Feb 17, 2020 3:27 pm
Forum: SeeMeCNC crew in the wild
Topic: MRRF 2020
Replies: 0
Views: 7317

MRRF 2020

Here's a link to the MRRF event this year
https://www.eventbrite.com/e/2020-midwe ... 3045636465

Mark your calendar
Fri, Apr 3, 2020, 5:00 PM –
Sun, Apr 5, 2020, 5:00 PM EDT
by PartDaddy
Mon Feb 17, 2020 2:58 pm
Forum: General Announcments
Topic: Forum maintenance update...
Replies: 9
Views: 10943

Re: Forum maintenance update...

Our forum has moved to a new home! It's been updated completely!

The foundation put down is solid and we welcome any comments. If needed, submit support tickets using our website if you find anything wrong and can not post it here.

:D
by PartDaddy
Mon Feb 17, 2020 2:51 pm
Forum: The Lounge
Topic: Forums looking shoddy,,
Replies: 7
Views: 6959

Re: Forums looking shoddy,,

our forums now updated :)
by PartDaddy
Sun May 05, 2019 1:43 pm
Forum: ORION
Topic: Help required please with Horizontal Radius on Orion Delta
Replies: 3
Views: 6940

Re: Help required please with Horizontal Radius on Orion Delta

Hi,

Avoid software leveling, such as within MatterControl. Level the machine itself.

The following wizard works very well. Just follow the instructions.
https://www.seemecnc.com/pages/delta-calibration-wizard

Go to advanced search