Welcome to the SeeMeCNC Community

This is an amazing deal. The steppers and RAMBo control board lone is worth this price.

Hi Jarvis, Original instructions can be found here:
https://www.seemecnc.com/pages/downloads

In Cura 4.5, from the menu, choose "File" then "Open file(s)..." and select the following file form our GitHub download. Then uncheck "Dual Extrusion" in the slice setting. A purge tower will not print and the printer will switch.

Nylons and even Carbon Fiber PETG benefit. Here's my setup, bucket was curtesy of Atomic Filament. metal bucket with 4mm PTC fitting (SeeMeCNC Part No. 38832) moisture strip from one of my Atomic CF PETG rolls in bottom, these are reusable desiccant dryer, rechargeable type does not need plugged in ...

Wow! Really nice looking model. Did you snap a photo while printing one of the parts?

Space is the place...

Thanks for sharing! ~Steve

Not sure what has been going on, but this is the first time I have been able to see the forums for weeks. Welcome back...or glad to be back...whichever applies. The SeeMeCNC forums now reside in a safe secure place on the interwebs, with special thanks to @beernutz & @geneb !!! Team SeeMeCNC is ver...

THIS SALE has been replaced by the SPRING 2020 Sale due to the delay in MRRF. :) MRRF 2020 - for a limited time the RostockMAX v4 KIT is back! Only release 20 kits for sale at a huge 28% off! Kit offer for pickup at MRRF for Thursday before the event at the SeeMeCNC Factory. :D MRRF2020 KIT OFFER.JPG

We're printing Alien Chess Set from thingiverse. Sliced with Cura 4.5.

Watch live. We usually have the shop nest cam on the printers.

https://www.seemecnc.com/pages/videostream

Very happy with the performance of the new version of Cura 4.5 and we've been busy updating new github.com/seemecnc slicing profiles this week. They fixed the single hotend multiple extruders in this release. Very happy with the performance too. https://github.com/seemecnc/slicing-profiles We catego...

Here's a link to the MRRF event this year
https://www.eventbrite.com/e/2020-midwest-reprap-festival-mrrf2020-tickets-73045636465

Mark your calendar
Fri, Apr 3, 2020, 5:00 PM –
Sun, Apr 5, 2020, 5:00 PM EDT

Our forum has moved to a new home! It's been updated completely!

The foundation put down is solid and we welcome any comments. If needed, submit support tickets using our website if you find anything wrong and can not post it here.

our forums now updated

Hi,

Avoid software leveling, such as within MatterControl. Level the machine itself.

The following wizard works very well. Just follow the instructions.
https://www.seemecnc.com/pages/delta-calibration-wizard

And if you don't finding something I made, just post or email sales @ seemecnc and I'll get it on here.

Yes. Once we complete the update, we will enable the dark theme.

Thank you!

Our forum will be shut down additional maintenance December 26th, 2018, during the evening. Thank you!!

Hi KSeledic, Thank you for joinging!

Hello mancoast, welcome to our forum.

I'd begin with the assembly manual at the link above. Original documentation from us. Track down wiring and check for short circuits, etc. > The LCD could just be plugged in wrong, you can't fry it even if you plug the two plugs in wrong, however they only work one way. > Ultimachine might repair th...

Hi grindliner, that's a great deal. The RAMBo control board and motors along are worth it. Power it on and see what the screen says.

Follow the original guide here: https://www.seemecnc.com/pages/downloads

You can get this machine printing great with ball joints carriages, arms, if it doesn't have them. Welcome to the forum.

While I respect this change as a SAFETY modification (& I WILL do it) I would like to know if it will reduce electrical noise and may thereby solve other (perhaps intermittent) problems. Again, I WILL DO THIS when the parts arrive, but I am still troubleshooting my initial build and would like ...

We have issued a Field Service Bulletin (FSB) for the Artemis. Artemis owners will be receiving an email today, August 24th, 2018. All Artemis shipped between November, 2017, and August 23, 2018, need to have additional grounding hardware installed. Starting Monday, August 27th, 2018, we will begin ...

The white two pin plug supplies power to the heater through the connection on the SE300 hotend. The white plug (Phoenix connector) can come apart from too much wiggle caused by print head movement and the bowden tube and wiring connections. The solution is reducing or eliminating any wiggle or movem...

I did not have time To red everything here. But if you are switching from FSR to The Strain gauge hot in the probe then you must rigidly mount your bed or it will not work.

Ok, we've tested a huge number of lubricants on the Artemis linear rails and this is turning out to be the best. Only started using it today, but right after applying several drops, this oil is performing noticeably better than other lubricants. Wipe rails, apply several drops above carriage on both...