Welcome to the SeeMeCNC Community

Awesome that makes a lot of sense, wasnt sure how the board handled the voltage. Thanks for the fast response! Dan.

Hey guys now that i got my max v2 dialed in with my duet wifi, I wanted to tackle the slow bed heating due to the 12v psu. I was reading that the duet wifi is capable of both 12v and 24v so is it just as simple of swapping out the 12v psu for a 24v psu? I know with the rambo you had to use a ssr to ...

With all the headaches ive been having with my first layer i shrank the bed mesh radius and added more probe points to see if that would improve the accuracy, i will add more probe points for the auto calibration.

Here is also my bed.g in case that sheds light on it ; About the G30 S parameter ; Used to specify what calibration computation to perform. ; ; S=-1 Don't adjust anything, just print the height error at each probe point ; S=0 Equivalent to S=<number_of_points_probed> ; S=3 Adjust homing switch corre...

Hey guys I feel really bad for flooding the forums with posts but i just can not seem to get a successful print after my upgrade. Im trying to solve the issue of getting a good first layer using auto calibration and bed mesh compensation but it doesnt seem to be working for me. Ive changed the radiu...

Thank you!

Hey guys just another quick question as i slowly get my upgraded v2 running. During the firmware update following mhackneys guide on his sublimelayers blog i used his files and changed what i needed for my max v2. The question i have as i slowly learn the new firmware style is that on the config.g s...

Thanks for the reply, also a fellow washingtonian (everett)! I think i might have solved the weak first layer extrusion problem, i guess i didnt use a drastic enough z offset. Originally i was using around -.07 when it turns out i needed closer to -.17. It still seems like im getting a lot of back p...

After completing my upgrade to the duet wifi, fsr setup and titan extruder i still havent managed a successful print. Calibrated esteps, auto calibration and bed mesh compensation. During the upgrade i followed mhackneys guide on his sublimelayers blog, used the firmware files he supplied but hopefu...

Thank you the help!

where do i define the c value? this is what my current M305 command line looks like in the config.g
M305 P1 T100000 B4725 R4700 H30 L0

Oh ok I will check to make sure I have the correct B and C values! Thank you for the fast and helpful responses!

Thank you that is very good information. I tried the value listed in the e3d v6 instructions with the results i listed above. I wasnt sure if the value was different between the old style of thermister and the new cartridge type. I will try the value again and see if i just transposed a number last ...

Hey guys so i recently completed my upgrades on my v2 adding the duet wifi, fsr kit, and titan extruder. The issue im running into and cant seem to find the correct settings deals with the v6 thermister. I bought the upgrade kit for my e3d v6 a while back that changes the thermister to the cartridge...

Thank you for the response! I will try this when I get home, in hind sight i should have wired it that way first lol

Hey everyone so I finally decided to pull the trigger and bring my Max v2 up to date with upgrades. Got my Duet wifi and titan extruder yesterday and im still waiting to get my fsr kit with the tricklaser fsr plate. Everything went pretty smooth with the upgrade process except i cant figure out how ...

Thank you guys for all the useful information!

Hey everyone its been a while since ive been on here. I was recently speaking with a friend who bought and built a tevo little monster delta. He was asking me about upgrades and was wondering if i had used tl smoothers. I had no idea what he was talking about so i looked into it and decided for the ...

Ive had almost the same exact issue with my prints, tried forever to figure it out to no avail. Decided i was going to set my esteps for my extruder back to the stock 80 do a test print to compare quality and to my amazement my print was almost perfect. I calibrated my esteps back when i built my pr...

I believe if you computer can still recognize the board through usb all you have to do is just reflash the firmware with arduino

Hey since you havent gotten a response you I thought I would hop on and share what I was told about it. I posed a similar question about the bltouch cause i really wanted that set up (post here http://forum.seemecnc.com/viewtopic.php?f=36&t=12183) but it seems that as far as hooking up a bltouch...

Thank you all for the fast response! I will definitely look more into the fsr system. Looks like the duet might just end up on my christmas list lol

Hey guys so ive been using my max v2 for about 2 years now and one thing that I have always struggled with is getting a level bed allowing me to utilize the full print area. My friend recently bought a Tivo little monster which has a BLTouch already installed which got me wondering if its worth it/s...

Hey try posting a picture of the print. Its easier to diagnose a quality issue thats present! Also you retraction speed looks a little slow for how far your retraction distance is, with your posted settings that is the only thing that looks out of place and might present quality issues. Post a pictu...

That makes a lot of sense. thanks for the advice! it will be nice to shrink down from my current enclosure which is huge lol