Some of us one the Facebook SeeMeCNC owners group have been sharing our setups with Simplify3D profiles.
Send me a private message Alan Zenreich and we can help get you started. Then we can post the results here.
Search found 271 matches
- Wed Dec 05, 2018 12:20 am
- Forum: RostockMAX v3
- Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
- Replies: 13
- Views: 11130
- Fri Aug 31, 2018 7:06 pm
- Forum: Artemis
- Topic: Screaming Demon
- Replies: 1
- Views: 2389
Re: Screaming Demon
If yours was one of the first batches of Artemis (that have the FSR in the base) make sure you have the most current firmware... the original firmware gave all sorts of odd issues.
- Wed Jul 11, 2018 12:28 pm
- Forum: RostockMAX v3
- Topic: 5" touch screen for upgraded V3 machine
- Replies: 6
- Views: 5617
Re: 5" touch screen for upgraded V3 machine
I would like to reposition the 5" display on my Artemis, are there any extension cables readily available (6 or 12" would work for me... I'd need both cables)
Thanks
Thanks
- Thu Feb 08, 2018 7:20 am
- Forum: Artemis
- Topic: First Probe Error and shutdown - FIXED
- Replies: 4
- Views: 3926
Re: First Probe Error and shutdown
Is the printer still attached to the computer with the USB cable?
If so, disconnect the cable from the printer and do the probe strictly wirelessly.
If so, disconnect the cable from the printer and do the probe strictly wirelessly.
- Sat Jan 27, 2018 11:59 pm
- Forum: Artemis
- Topic: Where are all of the detailed Artemis reviews?
- Replies: 7
- Views: 6715
Re: Where are all of the detailed Artemis reviews?
The Artemis is a great printer. I am very impressed with the build quality, feature set, quietness, and the quality of the prints it produces.
I hope the dual extruder option becomes available soon.
I hope the dual extruder option becomes available soon.
- Wed Jan 17, 2018 9:41 am
- Forum: Artemis
- Topic: Artemis - Build Notes
- Replies: 43
- Views: 24095
Re: Artemis - Build Notes
That's a nice little omega cable clip you've got there. However, I don't recall any Artemis cables that need taming. Am I missing something?
- Mon Jan 15, 2018 10:08 pm
- Forum: Artemis
- Topic: No joy with browser connection
- Replies: 19
- Views: 15086
- Sat Dec 30, 2017 10:23 am
- Forum: Artemis
- Topic: adarcher's build/troubleshooting
- Replies: 87
- Views: 43140
Re: First homing: horrible grinding sounds
First thing I noticed in your video... the USB cable is connected to the Artemis. Is it also connected to the computer? If so, it should not be... that caused grief for me when doing the first probe... it kept timing out. So remove the USB cable entirely once in Duet, then refresh the Duet web page....
- Sat Dec 30, 2017 10:15 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Adarcher, The fix for my fluttering was to replace the 4 wires that extended the extruder's wires to the plug that goes to the board, I don't know why this worked, as the original solder joints looked good, and when I plugged my new stepper into the old extension wires, it too fluttered. Now that I ...
- Tue Dec 26, 2017 2:36 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
- Mon Dec 25, 2017 1:38 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Marc, let me know if you have any questions.
- Sun Dec 24, 2017 4:08 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Considering that I replaced the stock solder joints on the extension cabling with new solder joints, I don't think that's it.
I didn't see anything particularly problematic with the extensions, other than they are pretty thin.
I didn't see anything particularly problematic with the extensions, other than they are pretty thin.
- Sun Dec 24, 2017 4:06 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
I never had a moment of doubt that we'd get this up and running (and find out what was going on).
The debugging was a bit tedious, but the printer is outstanding, so worth the additional effort.
The debugging was a bit tedious, but the printer is outstanding, so worth the additional effort.
- Sun Dec 24, 2017 2:24 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
IT’S ALIVE! ... and printing it’s first Benchy... ... but not without some fussing. Permit me to continue the story of the fluttering extruder... Due to some testing, the team at SeeMeCNC decided that the extruder stepper was bad... a first! Because of the holiday weekend, last night I opted to orde...
- Sat Dec 23, 2017 6:45 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Well, it looks like it is a bad stepper motor. Let's see if a replacement fixes the issue.
- Sat Dec 23, 2017 2:48 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
DC42, The hot end is fine... I can turn the extruder knob (when the stepper is disabled) and feed filament through the hot end without incident. However, all of my testing of the extruder problem has been with no filament in the extruder. My most recent test: I just removed the X axis wire connector...
- Sat Dec 23, 2017 2:02 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
A few shots of my board, perhaps someone can spot a problem with the wiring and suggest a fix or something to try.
- Sat Dec 23, 2017 12:06 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
At the connector, I measured resistance... across pins 1 and 2 1.5 ohms. The same across pins 3 and 4.
- Sat Dec 23, 2017 11:08 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Here is what I tried next. I swapped the connections for the X and E0 steppers. Then in Duet, I homed the printer, and the extruder motor started turning in a retraction direction. I manually clicked the X axis end stop to stop the extruder, and let the other arms home naturally. After all the arms ...
- Sat Dec 23, 2017 9:52 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Here is what I tried: I disconnected the x-axis stepper and placed the extruder stepper connector onto the x axis terminal I then homed the printer. The stepper motor spun properly, and obviously would continue to spin because there is no endstop being engaged. So, at least we know that the motor ca...
- Sat Dec 23, 2017 7:57 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
The manual has been corrected, the instructions now call for the red wire to go on pin 1, so now the text and photos are in sync. The red wire picks up 5v from the expansion connector.
- Sat Dec 23, 2017 7:36 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
The red wire in question appears to be used in step 29 for the FSR probe
- Sat Dec 23, 2017 7:11 am
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Thanks for the reply, I will try another driver
The assembly instructions are here: https://seemecnc.dozuki.com/Guide/Assem ... 81?lang=en
The assembly instructions are here: https://seemecnc.dozuki.com/Guide/Assem ... 81?lang=en
- Fri Dec 22, 2017 10:56 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
--The build is complete, but it won't extrude . I can manually extrude by turning the knob when the hot end is up to temp, but the extruder motor won't turn... it just "flutters". We checked for continuity across the extruder coils, so that seems fine. Any thoughts are appreciated. --Also ...
- Fri Dec 22, 2017 2:57 pm
- Forum: Artemis
- Topic: The Artemis arrives in NJ
- Replies: 31
- Views: 21344
Re: The Artemis arrives in NJ
Words I never thought I'd ever post on a public forum:
"I found the lubricant!"
It is packed in with the back of aluminum ball joints, but the lubricant is white in a clear packet, and quite invisible when the bag of ball joints is on top of the white packing list.
"I found the lubricant!"
It is packed in with the back of aluminum ball joints, but the lubricant is white in a clear packet, and quite invisible when the bag of ball joints is on top of the white packing list.