Welcome to the SeeMeCNC Community

I've found the problem but not a solution. The issue is that MatterControl uses port 443 when connected to the cloud. AT&T doesn't allow that port to be used. The issue isn't just with MatterControl, you also can't connect externally to things like security cams, file servers, etc. The solution ...

Greetings, I have a Touch but can't get it to login to the MatterControl cloud with AT&T uverse. I was able to connect using my Sprint phone as a hotspot but I'm not sure how reliable that connection is. The Sprint hotspot wasn't able to complete and update download. I'm guessing there is some p...

I also ended up at full travel on one of the stop screws while calibrating. The solution is to simply reverse the direction of all the screws by the same amount. You can then continue to adjust the problem tower relative to the others.

Did you change the horizontal radius and recalibrate when changing to the new arms?
The manual says to start at 140. I ended up at something like 144.

I know there are millions out there but http://www.Adafruit.com" onclick="window.open(this.href);return false;. They support the community.

Eaglezsoar wrote:
Do you know of a good source for the ISP programmers?

I'm using the Touch, if there were loops I suspect the 1 inch characters were too small for 2 loops to have worked? I'll double check it tonight.
Thanks,

I'm guessing that one solution is to set some number of loops before starting the print?

Greetings and thanks for the forum, I received our kit (Rostock Max V2) early in October and with the help of my 11 year old son, printed the fan shroud yesterday. I need to do more work on calibration. I got to the point that the nozzle was clearing the print bed at all three columns and looked to ...