Search found 160 matches

by DerStig
Sat Jun 30, 2018 4:07 pm
Forum: Rostock MAX v2
Topic: Duet 2 Upgrade with 5" PanelDue
Replies: 5
Views: 5166

Re: Duet 2 Upgrade with 5" PanelDue

Any chance you'd do that for the Panel Due 7i?
by DerStig
Thu Jul 13, 2017 1:29 am
Forum: What are YOU making?
Topic: Coming soon from 713Maker.com
Replies: 69
Views: 75844

Re: Coming soon from 713Maker.com

How much?
by DerStig
Fri Jun 30, 2017 5:56 pm
Forum: Troubleshooting
Topic: Anyone near Burbank? I’m needing some help
Replies: 0
Views: 1822

Anyone near Burbank? I’m needing some help

Had the printer working fine ( well it can always be improved) but now it’s not reading the calibration thump. I was on Duet 1.17 firmware and I’m thinking theynchanged something with 1.19

Can anyone help? I’m losing what little I have left of my mind on this

Thanks

Eric
by DerStig
Sat Apr 15, 2017 1:39 am
Forum: The Lounge
Topic: Effects of microstepping and segmentation on print qualty
Replies: 33
Views: 24338

Re: Effects of microstepping and segmentation on print qualty

Interesting. My steps per mm is actually set at 80.7. I calibrated that with a dial indicator (modified it until a Z axis move command equaled the change in reading on the dial). How did you come up with the 0.1618 layer height? I used to set my steps/mm according to what the caliper told me, but r...
by DerStig
Thu Feb 23, 2017 10:51 pm
Forum: RostockMAX v3
Topic: Quite disappointed
Replies: 15
Views: 10243

Re: Quite disappointed

sounds more like buyers remorse and trying to get your money back. None of your issues are deal breakers and they are very easy to fix

SeemeCNC's customer service is top notch. They routinely go to of their way to help people
by DerStig
Thu Feb 23, 2017 10:21 pm
Forum: Troubleshooting
Topic: Rough areas in my 1st layer
Replies: 2
Views: 2751

Re: Rough areas in my 1st layer

Those look like high spots on the build surface making the nozzle closer to the build plate
by DerStig
Thu Feb 23, 2017 2:00 pm
Forum: RostockMAX v3
Topic: Trying a E3DV6 extruder
Replies: 6
Views: 5460

Re: Trying a E3DV6 extruder

you can use the effector platform with the barbells and the fans. you will need to remove the HE280's print head and replace with the E3Dv6 you will also need hotend mount, and accelerometer board standoff you will need to desolder the board and swap in the new heater cartridge for the E3Dv6 and the...
by DerStig
Tue Feb 21, 2017 1:13 pm
Forum: General Tips 'N Tricks
Topic: Optimum layer height vs Nozzle size
Replies: 3
Views: 3973

Re: Optimum layer height vs Nozzle size

I'm wondering if there is a micro step/extrapolated layer height that is less desirable than say for lack of a better term prime height. Should all heights be divisible by our steeps per mm so as to be "native"?
by DerStig
Tue Feb 21, 2017 3:14 am
Forum: General Tips 'N Tricks
Topic: Optimum layer height vs Nozzle size
Replies: 3
Views: 3973

Optimum layer height vs Nozzle size

I guessing there is a optimum Nozzle size to layer height vs steps per mm ratio. So how do we figure out?
by DerStig
Fri Feb 17, 2017 1:29 am
Forum: RostockMAX v3
Topic: Which upgrades to buy
Replies: 15
Views: 11512

Re: Which upgrades to buy

mhackney wrote:Also realize, I gave up on getting the accelerometer probe interfaced to the Duet. It was just not up to my reliability standards. You can give it a shot but perhaps trash80's version would be a better way to go.
I am using the trash80 interface and it works great
by DerStig
Thu Feb 16, 2017 12:46 am
Forum: Filament
Topic: Black Filament from Hell
Replies: 6
Views: 6959

Re: Black Filament from Hell

OK, this is getting annoying. Every other PLA filament color I have -- all apparently the same batch from the same manufacturer, print between reasonably to great. But my first spool of black PLA is possessed. Every time I try to print, it's OK for 3 or 4 layers, than I start to get stepper skips. ...
by DerStig
Wed Feb 15, 2017 12:42 pm
Forum: The Lounge
Topic: Makerhive YJ-RHEP-V3r3 Quick Change Board -Need Help despartely!
Replies: 2
Views: 3337

Re: Makerhive YJ-RHEP-V3r3 Quick Change Board -Need Help despartely!

Just use the HE280 board and Wire Whip
by DerStig
Fri Feb 10, 2017 2:35 am
Forum: The Build Zone
Topic: Rostock Max V3 Build with minor mods
Replies: 60
Views: 42870

Re: Rostock Max V3 Build with minor mods

Where do you get the duet board? I'mlooking for something more affordable than the Rambo ($180). What other boards will work with the V3? Thanks and I look forward to hearing about your build! I have a Duet .85 board, its the board right before the Wifi and I have the expansion board and thermocoup...
by DerStig
Wed Feb 08, 2017 7:55 pm
Forum: The Build Zone
Topic: mhackney's Real V3 Build Thread
Replies: 165
Views: 174273

Re: mhackney's Real V3 Build Thread

I replaced it with either a TrickLaser platform or a 713Maker platform. However, there is a gent (Will Jayne) in the UK that has designed a new platform mount for the E3D this week. I have the STLs and it looks good. He'll be posting on TV soon. He posted some photos in the Facebook group. I'll pos...
by DerStig
Tue Feb 07, 2017 2:58 am
Forum: Mods and Upgrades
Topic: PEI disaster
Replies: 33
Views: 39359

Re: PEI disaster

Acetone works a treat. Pour some on a paper towel, lay that on the adhesive let it sit for a few mins. Wipe off, that's it
by DerStig
Wed Feb 01, 2017 8:09 pm
Forum: Duet
Topic: Duet Auto-Calibration results - More Data Needed!
Replies: 43
Views: 33638

Re: Duet Auto-Calibration results - More Data Needed!

Well changed my steps per mm to 80.64 and here are my results G32 Bed probe heights: -0.031 0.009 0.002 0.019 -0.012 0.014 0.031 0.051 -0.031 0.075 0.062 -0.025 -0.095 -0.050 0.040 0.027, mean 0.005, deviation from mean 0.043 M666 Endstop adjustments X-0.05 Y0.02 Z0.03, tilt X0.00% Y0.00% M665 Diago...
by DerStig
Tue Jan 31, 2017 12:30 pm
Forum: Duet
Topic: Duet Auto-Calibration results - More Data Needed!
Replies: 43
Views: 33638

Re: Duet Auto-Calibration results - More Data Needed!

So, the pattern I have, and see in all the other data contributed to me so far is this. After a full round of calibration, if you re-run the calibration script changing your S6 / S8 to an S-1, there is a wave pattern to the results. It measures higher at the towers, and lower opposite them. What I'...
by DerStig
Mon Jan 30, 2017 2:51 pm
Forum: Duet
Topic: Duet Auto-Calibration results - More Data Needed!
Replies: 43
Views: 33638

Re: Duet Auto-Calibration results - More Data Needed!

kraegar wrote:Derstig:
You have these arms? http://tricklaser.com/300-MM-Carbon-Fib ... FTX300.htm

Do you have any sort of spring or strap between each pair to limit backlash?

Yes those arms and no springs and I just realized that those numbers include my Z height offsets
by DerStig
Sun Jan 29, 2017 7:31 pm
Forum: Duet
Topic: Duet Auto-Calibration results - More Data Needed!
Replies: 43
Views: 33638

Re: Duet Auto-Calibration results - More Data Needed!

G32 Bed probe heights: -0.659 -0.713 -0.809 -0.720 -0.801 -0.837 -0.759 -0.749 -0.775 -0.670 -0.688 -0.796 -0.898 -0.821 -0.725 -0.737, mean -0.760, deviation from mean 0.063 PMM666 Endstop adjustments X0.36 Y-0.05 Z-0.31, tilt X0.00% Y0.00% PMM665 Diagonal 300.000, delta radius 133.470, homed heigh...
by DerStig
Sun Jan 29, 2017 2:51 am
Forum: Duet
Topic: Duet Auto-Calibration results - More Data Needed!
Replies: 43
Views: 33638

Re: Duet Auto-Calibration results - More Data Needed!

Hey here are my numbers Diagonal 300.000, delta radius 133.470, homed height 356.904, bed radius 150.0, X -0.029°, Y 0.258°, Z 0.000° Endstop adjustments X0.36 Y-0.05 Z-0.31, tilt X0.00% Y0.00% RepRapFirmware height map file v1, mean error -0.01, deviation 0.05 xmin,xmax,ymin,ymax,radius,spacing,xnu...
by DerStig
Sun Jan 22, 2017 7:20 pm
Forum: Troubleshooting
Topic: Hot end won't heat above 220C
Replies: 15
Views: 12901

Re: Hot end won't heat above 220C

try sending a M143 S350. that should set you max possible extruder temp to 350c follow it with a M500 to save it. then see if your extruder will go above 220c
by DerStig
Sat Jan 21, 2017 1:50 pm
Forum: Troubleshooting
Topic: How Install E3D V6 on Rostock Max V3
Replies: 1
Views: 2870

Re: How Install E3D V6 on Rostock Max V3

Its really simple. You are going to need a new effector mount and a accelerometer mount several are available from 713maker.com Tricklaser.com or thingiverse http://713maker.com/mounts.html http://713maker.com/effector.html http://www.thingiverse.com/thing:1776691 or http://www.tricklaser.com/Alumin...
by DerStig
Sun Jan 15, 2017 8:10 pm
Forum: Mods and Upgrades
Topic: PT100 sensor for Duet WiFi
Replies: 7
Views: 5974

Re: PT100 sensor for Duet WiFi

It seems as the E3D PT100 sensor & board are the most common and readily available combination. However, since the Duet Wifi uses it's own daughter card to interface to a PT100 sensor, there's no use in buying an E3D board. In the same vein, is there a recommendation for a non-E3D PT100 sensor?...
by DerStig
Thu Jan 12, 2017 10:03 pm
Forum: New Member introduction
Topic: Hello from the home of the Coke bottle!
Replies: 10
Views: 7562

Re: Hello from the home of the Coke bottle!

lake29 wrote:So, you are saying that your Ben Collins?? LOL
LOL, I am not Ben but we are friends
by DerStig
Tue Jan 10, 2017 3:18 pm
Forum: RostockMAX v3
Topic: Rostock Max v3 upgrading to e3d v6 hot end?
Replies: 25
Views: 21705

Re: Rostock Max v3 upgrading to e3d v6 hot end?

I plan on doing the same. It looks like all you need to do is find an innovative way to mount the accelerometer board onto the E3D V6. I do want to increase the temperature capability high enough to print Ultem material at 350C so I plan on converting the thermistor to a thermocouple. Anyone have a...

Go to advanced search