https://www.youtube.com/watch?v=4ZaTx0hO4XM // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. // #define BACKLASH_COMPENSATION #if ENABLED(BACKLASH_COMPENSATION) // Define values for backlash distance and correction. // If BACKLASH_GCODE is enab...
if you need a new card I recommend a 32bit U $ 17 (pins_BIQU_SKR_V1.1). if you want I send you my configuration (rostock max V2 marlin) https://es.aliexpress.com/item/BIGTREETECH-SKR-V1-1-32-Bit-Motherboard-Smoothieboard-with-ARM-CPU-Control-Board-Open-Source-Support/32959495023.html?spm=a219c.10010...
I want to give you some advice. I have a max v2 and I have spent a lot of time calibrating it. and I would like you to know some small details that have helped me improve my max v2. since you have the max v2 almost unarmed. You should compare the holes of the towers in the wood. why say this (in...
My first Test. I do the g33 with low speed to see if my platform tilts when the extruder touches the bed ( :D :lol: very happy the platform now stays completely straight. with my previous system the platform was tilted a bit when it touched near the ends of the bed. The Radius chnge from 137.35 to 1...
I believed the same. (be surprised)
My tool works very accurately.
I want someone to do the same test that I did and confirm if I'm wrong.
I receive exactly the same 0.25mm after moving 5mm 10mm or 100mm.
Hi all, I found that My rostock max v2 has backslash in all 3 motors. circle test: https://www.thingiverse.com/thing:1072538 Axis Backlash / Hysteresis Compensation Phaelz: Marlin https://github.com/MarlinFirmware/Marlin/issues/7579 http://forums.reprap.org/read.php?267,306320 repetier: Only for Car...
14 april 2018 I found: https://www.thingiverse.com/thing:1274733/ Hi Harblar, When I start calibrating my rostock with the box 50x50x10 I noticed some distortions in my printer. DSC_0282.JPG Hex50x50x2HOK1.stl I would like you to use a hexagon better than the cube so you can play with. repetier #def...
why MatterControl only shows and work only whit the steps of z My step motors need different steps. I think it's because of different tension or something with the belts. this are the numbers #define XAXIS_STEPS_PER_MM 79.8935 //In this case gives me 0.4 millimeters less after moving 300mm #define Y...