Welcome to the SeeMeCNC Community

I am using 1.8 steppers from seemecnc site. So would I halve the value?

So do I included the M114 at the end of the bed file?

Also You mentioned the extruder speed is nuts? Could you suggest a starting value? And after I run the bed map, then I run M500 and print correct?

Yes I have an older ezstruder. What should it be? M203 Z25000 G28 M109 S0 M140 S0 M106 P0 S0 M106 P2 S0 H-1 G30 P0 X0 Y125 Z-99999 G30 P1 X108.24 Y62.5 Z-99999 G30 P2 X108.24 Y-62.5 Z-99999 G30 P3 X0 Y-125 Z-99999 G30 P4 X-108.24 Y-62.5 Z-99999 G30 P5 X-108.24 Y62.5 Z-99999 G30 P6 X0 Y62.5 Z-99999 G...

; Configuration file for Duet WiFi (firmware version 2.03) ; executed by the firmware on start-up ; ; generated by RepRapFirmware Configuration Tool v2.0.4 on Thu Sep 26 2019 21:24:04 GMT-0500 (Central Daylight Time) ; General preferences G90 ; send absolute coordinates... M83 ; ...but relative extr...

Ok so I decided that since I had finished grad school I needed to get the v2 that I had pieced together calibrated and running. I have upgraded the arms to the newer ball and socket 290 arms, Duet 2 board and the smart effector with v6 hot end. I have tried the setup several times and the auto calib...

Can you post the parts you used to build your probe please? for instance the magnet and rod length you used?

Ok so i have a built a Rostock Max v2 piece by piece and as im in this forum I have powered it with smoothieboard 5x. I have followed all the guides on smoothies page and have been in the IRC multiple times. Ive gotten some help but still need more and they can be rather slow. SO my setup is a V2 wi...