Welcome to the SeeMeCNC Community

Too late

Stripped the Max V2 for its parts to make a CNC (I have a far more reliable 3d printers now).
Stripped out the cabinet and burnt it.

Bye bye rubbish Max V2

Not sure if this is the right place to put this? It is Max V2 related! Don't ever use my Max V2 now, so the cabinet is just sitting there unused. It is madly over-engineered. It has a pair of plug-in heated panels that heat the cabinet very well. The top half of the cabinet is separate to the base c...

Hello all Need to make some space and wave goodbye to my currently non-working RoStock Max V2 printer. The hotend clogged, died and never got repaired. It might be retrievable, but I have just not had the time or parts to replace the hotend. Personally, I would just buy a new hotend, as they are pre...

Thanks

Hi all
Long time since I have been around. I abandoned the V2 for a while for reasons of sanity.

It was def 0.4mm when I got mine (and still is). I think I will get 3.5mm then (and maybe a 0.5mm for trials).
I have a horrible feeling they are not going to make any new nozzles for the V2 and leave us stranded when the stock runs out

Thanks. I will look into this then. Will going from an 0.4mm to an 0.5mm make much difference to my prints? Maybe I am better going down to the 3.5mm? Why are the 0.4mm size missing.... is this something that is not being produced any more? :shock: Been moving house etc for 6 months and been totally...

I thought the original standard hot-end nozzles were 0.4mm?

I have been totally out of the loop for the last 6 months. Is there a new shiney hotend that will fit (or can be made to fit) the Max V2?
The E3dv6 I had was a nightmare... currently running the factory one

Hey all I just tried to find spares (an 0.4mm nozzle to be exact) for my RoStock Max V2. Could not find them anywhere (I am UK, but willing to purchase from US etc). Tried a tech ticket to SeeMe CNC to ask them, but the Capatcha 'not a robot' thing wasn't working and would not let me send the ticket...

Took the 8gb Class 10 sd card out of my in-car camera and tried that...

SUCCESS

Printed very nicely and not a flaw in the print (that I can see).

Maybe I have finally got this temperamental pile of servos to actually work

Mmm... OK. I read that people were solving sd card stopping issues by getting better sd cards. I think I will get a 4gb class 10 card anyway - just to rule it out. Temps... think we should be OK on that front. I have LOADS of extra cooling in the rambo bay. A 12cm side fan pulls the air out of the e...

Just had a Google (the time I have spent on Google over this thing....._). Looks like the sd cards they supply with the printer are only class 4 and not up to spec - causing failures (WHY SUPPLY THEM THEN - bangs head on wall). Apparently a class 10 sd card is a much better option. Hopefully that is...

It was printing standalone - no USB lead attached. Printing the file off the sd card. Was printing very well and then the print head just stopped with no warning. Just sat there. Hotend stayed at full temp, it just seemed to grind to a halt. Is there a limit to the G-code size that can be read off a...

and spoke too soon.....

as the print randomly stops from the sd card after 3 hours

Tried new usb leads - wasn't that. It just randomly started doing it after probably nearly a year of being fine.
I am suspecting my Sony Vaio.
Most of my previous issues are not down to the lead

What... its.... printed.... something.... correctly :o I am sure it could be better, but finally.... something that actually goes together and works (servo operated release valve) Its the best quality I have had out of it by far Now just need to get off Tinkercad (oh so easy to use) and then I might...

NOBODY can say I have not stuck with this thing. Its taught me patience I never thought I had :roll: Amazingly... its kinda behaving today. Maybe I have turned a corner? Printing from the SD card is working far better. I know I moan about it a lot... but I have put so much time into this thing that...

The E3d V6 will never see my printer again Stock head works far better. Sticking with that. I don't need to lose any more evenings over the V6

Just printing straight off the SD card.
So far... its still going.

One day.

One day....

I will get a full correct print

Tried slowing the comms speed. Re-installed Rambo drivers.

Just randomly died again after 2 hours.

How do you print from the SD card? Do you set up your print in Mattercontrol and then save it to the card?

Why do people always assume that we have not tried everything? I spent hours, days, months trying to get the E3d v6 working. It never did work properly. I have poured more wasted hours into this 3d printer than I have ever done with any other hobby. As I type, the printer has failed again. These thi...

Now randonly during prints, Mattercontrol throws up 'semaphore timeout period has expired' and disconnects from the printer.

Reinstalled all drivers. Reinstalled all USB drivers.

Still does it

I (stupidly) started with the E3D V6 print head and found it to be useless. The nozzle kept undoing itself, and I never got a decent print out of it. My prints improved vastly when I went back to the factory hotend. The E3D V6 blocked quite a lot as well. Not really much help to you, but I do feel y...

I have printed on 100deg, 90deg,, 80deg.... 60deg just happened to be the last temp I tried. Its not like I have not put the hours into this thing to try and get it to work. Anyway, I have reached a point now where I need to move on from this machine and do something more constructive with my time. ...